Description

This product is the Pressurized solar water heater The characteristic of Pressurized solar water heater 1) This type of solar water heater works with high pressure, so do the water it prodeces. 2) It uses the heat pipe to delivery the heat energy, it can works rapidly. 3) Because of no water in the vacuum tube, so there will not tube breakage in the xxxxx 4) Each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage. The material of this pressurized solar water heater: 1) Inner tank:stainless steel**0.*0mm. 2) Vacuum tube:QB-AL-N/AL*******0. 3) Outer tank:painted steel*0.4mm;stainless steel SUS****0.4mm. 4) Frame:coated galvanized steel*1.5mm;stainless steel SUS****1.5mm. 5) The masterial of insulation:polyurethane *0mm. 6) The reflector of this solar water heater:aluminum component;AL*9.*5% surface oxidation. 7) Copper coil:�*2mm, thickness 0.8mm. The details of this pressurized solar water heater with heatpipe: Type Area( � ) Vacuum tube Volume(liters) Gross wet(kg) �(mm) Length(mm) Qty(pcs) TZ*7/******8C 2.*5 *7 ***0 *8 **0 *0 TZ*7/******0C 2.*0 *7 ***0 *0 **5 *5 TZ*7/******4C 3.*0 *7 ***0 *4 **5 *3 TZ*7/******0C 3.*5 *7 ***0 *0 **0 *0 The Principle of this pressurized solar water heater with heatpipe can get from us. The key words: solar water heaters, solar collector, solar collector u pipe, solar energy, pre-heated solar water heater, solar water heater collector, High Pressure solar water heater with heatpipe