Description

Mould Mould is AAC production major ancillary equipment.After the raw materials uniform mixing, it is pouring into the mould, solidifying and expanding After curing, off-mould, which can be cut. Hoister The hoister is used to hang the cake(together with mould and bottom board) to cutting plate, then take off the mould, the cake will be cutt. Hoister is main assistant equipments in AAC producing. Hardening car Hardening car is the main ancillary equipment in the production of aerated concrete. The cutted body was hoisted into the hardening car with the bottom plate. The hardening car organizes the body and bottom plate into groups and carries them into autoclave for steam curing. Adopt *2# trough steel welded together, combined with bottom board and mould casing, operation smooth and light. Autoclaved Aerated concrete (AAC), or otherwise known as Autoclave Cellular Concrete (ACC), is a lightweight, precast building material. AAC provides structure, insulation and fire resistance in a single material. AAC products include blocks, wall panels, floor and roof panels, and lintels. It has since been refined into a high thermally insulating concrete-based material used for construction both internally and externally. Besides insulating capability, one of AAC&#**9;s advantages in construction is its quick and easy installation since the material can be routed, sanded and cut to size on site using standard carbon tip band saws, hand saws and drills. Even though regular cement mortar can be used, *8% of the buildings erected with AAC materials uses thin bed mortar, which comes to deployment in a thickness of 1/8 inch. This varies on national building codes and creates solid and compact building members. AAC material can be coated with a stucco compound or plaster against the elements. Siding materials such as brick or vinyl siding can also be used to cover the outside of AAC materials.