Description

�TORTOISE� JS***5 JS***5 is polyurethane based two component bitumen modified sealant.Suitable for heavy traffic and has resistance to surface movements.Does not affect from sea water, jet fuels, hydraulic materials, oil. Specifications Perfect adhesion Elastic ( %**0) Suitable for outdoor usage UV resistance Paint applicable Has Resistance to different weather conditions (**0C / ***0C) Create smooth surface Certificate: TS ***6 Technical Specifications Density 1, *0 gr/cm3 Working temperature 5C / - *0C Shore hardness *5 Hardness time *4 hours Flexibilty %**0 Max. Joint edge widht 4cm Shelf life 1 year Color Black Application Fields Especially used in Air port fields (running tracks), Park, Bus station, Gas station, Highways, Petro chemical and other industry facilities(their roads and concrete fields), Crack fillings at airports, highways, bridges. Can be used for water proofing. Application Surface preparation: the joint edges must be clean, all oil, dust, dirt, and any other materials that may be used before must be removed. Water affects the JS***5 so joint edges must be dry and JS***5 must protected from water unless the chemical hardness occured. JS***5 can be applied without primer application.But primers increase the resistance of the surface so we prefer you to use AS **4 primer before JS***5 application.Afert **2 hours the sealant can be applied. But if *4 hours past on and if still there is no JS***5 do not apply the sealant on dry primer. Renew the primer AS **4. Polyethylene wicks must be used for filling to avoid adhesion of sealant to the bottom of joint ***** gives ability for two way movement. Wick�s diameter should bigger than %****5 of joint edge�s diameter.Width and deep of the edge should not be less than 5mm.Up to *5mm; the width size of the edge should be equal to its deep ***** wider joint edges, the deep size adjusted to ****5mm. For hand application