Description

Modular Check Valve: 1. Modular check valve is widely applied in all kinds of circuits. 2. Has two kinds of cracking pressures to meet system requirement. Modular Pilot Operated Check Valve: 1. Modular pilot check valve is used to prevent actuator self-running and to maintain actuator position. 2. Maximum working pressure is **0 kgf/cm2. Modular Relief Valve 1. MRV series modular relief valves provide maximum pressure control of hydraulic circuit. 2. Wide range of operating pressure, adjusting range from 8 to **0 kgf/cm2. 3. Wide range of applicability, maximum working pressure **0 kgf/cm2. Modular Reducing Valve 1. Modular reducing valves makes the pressure in part of the circuit lower then that of main circuit. 2. Even when pressure changes in the primary main circuit, then secondary reduced pressure is maintained at the constant level. 3. Maximum working pressure **0 kgf/cm2. Modular Throttle Valve 1. MT series throttle valve is not included check function, could be restrict flow for both direction. MCT series is included check function and could be use as one way throttle valves. 2. Many different control ports could be applied in different circuit. 3. Maximum working pressure **0 kgf/cm2. Modular Throttle and Check Valve 1. MTC series throttle valve is used to control the speed of actuator and for other flow control applications. 2. Wide range of control ports could be applied in different circuit. 3. Maximum working pressure **0 kgf/cm2. Solenoid Operated Throttle Valve 1. MST series throttle valve is solenoid controlled throttle valve. When solenoid is off, the flow is not restricted by the throttle valve. When solenoid is on, the flow will be restricted by the throttle valves. 2. Four kinds of coils in different voltages could be chosen according to system requirement. Modular Two Section Reducing Valve Modular Sequence Valve Modular Counter balance valve Modular balance valve