Description

Overview: CL-EIP***0 converter is Connecting traditional circuit-switched service as well as packet-switched data service over IP networks has become an attractive alternative to sufficiently using IP networks today. Efficiently combining TCP/IP technology together with TDM technology, TDM over IP circuit simulator - TDMoP. It enables synchronous E1 signals delivered over broadband IP networks, takes the advantage of the low cost data transmission networks, seamlessly connects with all the traditional TDM terminals, that is, accommodates the traditional TDM services, such as PBX, modem, fax and video into IP networks. Feature: 1. Support mixed transmission of up to E1 circuit traffic and high speed IP data traffic 2. Support framed, non-framed E1 signal transmission 3. High accuracy and stability of clock with closed-loop PLL technology 4. Fast clock-locking, easy synchronization 5. QOS management, ensuring high quality of TDM traffic 6. High reliability, long MTBF 7. G.**3 E1 and *0/**0Base-T Ethernet Interface 8. Configure by CLI: RS***2/v.*4, Telnet 9. Easy to use, plug in and play Specification: 1. Power AC Input: **0~**0V DC Input: **8V Power Consumption:�3W 2. Ethernet Port Standards IEEE **2.3, **2.1p/Q Data Rate *0/**0 Base-T, half duplex or full duplex, auto-negotiate Range Up to **0m on UTP Cat*5 cable Connector RJ**5, 8 pins 3. E1 Port Standards ITU-T Rec. G.**3, G.**4, G.**6, G.**2, G.**3 Signaling Framed &Non-framed, CCS, CAS Nominal Date Rate 2.**8 Mbps Line Code HDB3 Receive Signal Level Without LTU: 0 to **5dB With LTU: 0 to **3dB Line Type *5Ω (Unbalanced) �pulse� scope Nominal 2.*7V±*0% (*5Ω) �0� scope ±0.1V Connectors BNC (*5Ω) 4. Control Port Standards RS***2/V.*4 (DCE) Data Rate ***0 Baud Date Format Data 8; stop 1; checkout/traffic none Connectors DB*9 (female) 5. Environment Operation Temperature: 0~*0O Operation Relative Humidity: *0~*0% Store Temperature: **0~*5