Description

Model ELC**0TM carries 9 junction boxes �*0 channels by each box. Each channel can support the firing /discharging of *0 electrical matches at on go. The model comes with **0 M lead cables, comes with time which can time separately & accumulative total. 1. Connecting; a. Connect the connector plugs of firing system to the alternating current supply point. b. Turn on the ON / OFF switch, c. The indicator light bulb will indicate that the supply is serving the console, d. Voltage Meter on console will indicate the voltage as supplied into the console unit. NB:- This show that the unit is functionally /operational mode and ready for use. 2. Testing; a. Ensure that the junction box / boxes and products are correctly connected. b. Turn the switch to �test� position. For example, test of the first 8 channel of the first district. c. Turn the selecting switch of first district to A, and turn log off the other two districts. d. Turn the selecting switch of to A, and turn logoff the other segments. d. �Press� / �Activate� the 8th push switch, e. � when console is switch to test mode� a red indicating light show up, if the indicator brighten up, this is indicating that the products correctly connected and is ready for the actual discharge when required. f. Repeat this steps for �testing� of all other channels and connection. 3. Fire; a, The same way as per the testing for continuity and products during the test steps, ENSURE that the switch is on �fire� position / mode. b, if you wish to discharge several groups at the same time; just connect the products to the same Channels but different junction box / boxes.