Description

Electric plywood is a densified laminated wood , based on high quality and selected beech veneers, stick together with a Electrical thermosetting synthetic resins under high pressure and temperature. The most important characteristics are: Good Electrical properties Excellent absorption of transformer oil High mechanical strength Low and high temperature resistance Good resistance to the abrasion and wear Due to the characteristics of the product , it is mainly use in the electrical oil transformers applications as high electrical insulation material as pressure beams, step blocks, pressure spare parts, top and bottom support coils, potential rings, pressure rings , spacers, etc. For his mechanical strength, it can be also use for many applications as abrasion resistance material under stress. Standard Range of Production The electric plywood is produced in 3 different densities, L : Low Density , between 0, *5 to 1, *0 g/cm3 M : Medium Density, from1, *5 to 1, *0 g/m3 H : High Density , over 1, *0 to 1, *5 g/cm3 The lamination is made on crosswise veneers , and the standard thickness of the veneer is 2 mm. Under specification we can produce from 1 mm , 1, 2 mm and 1, 5 mm thickness veneer too. For non electrical application and according specific requirements , we can produce in a sheets on parallel veneer. Sheet sizes( aprox.) L : ***0 x ***0 mm , ***0 x ***0 mm, ***0 x ***0 mm , and ***0 x ***0 mm M : ***0 x ***0 mm, ***0 x ***0 mm, ***0 x ***0 mm , and ***0 x ***0 mm H : ***0 x ***0 mm, ***0 x ***0 mm, ***0 x ***0 mm and ***0 x ***0 mm We can machined spare parts produced under CNC equipment with sizes according sheets availability