Description

MINERALIZER-A3WATER PROOFING The technique of crystallization by impregnation with HYDROSAN or MINERALIZADOR A*3 causes the bearing pores retraction through the formation of Unsolvable crystal of calcium-silicate ( SiCaO3 ) and oxide silicate ( SiO2 ). The crystallization. But maintaining the permeability at steam. Water filtration and capillary transmission rest cut as the way where the water penetrates kept closed. Treated walls keep still < breathing > as normal. Definitive. The crystallization of pores and capillaries creates in the support a large zone absolutely water proof against pressures of water over 3kg/cm3 either in situation with positive or negative pressures. The treatment could be made by one side or both sides of the wall. Indistinctly, and with same grade of efficiency. Resistant. The crystallization methods are totally resistant to abrasion and ageing to thermo shock. Environmental agents and chemical aggressive. Without caducity the useful live of system is exclusively determinate by the duration of support. All materials used in conventional construction have two characteristics in common. Porosity of grain structure. Presence of free calcium ions. The crystallization technique of < A MINERALIZAR A*3 > takes advantage of these Characteristics in controlled. easy and sure method to change the Molecular structure of every base material in such a way and sure method to change the molecular of Dust try: **5 0/0 at 1 kg/m2 application quantity: after 1 hour Rain proof: after approx. 5 hours. Fully dry and load-bearing: after *2 to *4 hours amount required. Flat roofs: approx. 1 kg/m2. Clay roof tiles 9pitced roofs ) approx. 0.3 , g/m2. Fibre-teinforced cement roofs: approx. 0.5 t 1 kg/m2. SULFITON R THICK COATING. This plastic Emulsion Thick Coating on polymer Modified bitumen Base in Top Quality.9 test certificate availa