Description

*1. Nominal power Capacity: Volts-Amps/Watts(VA/W): ***0VA/**0W ***0VA/***0W ***0VA/***0W *2. Input Nominal Voltage: **0/**5/**0Vac or **0/**0/**0Vac Voltage Range:*****8VAC or ******0VAC Frequency Range:*0Hz: ****4Hz(Default), *0Hz:*****0Hz Power Factor: â?¥0.*5 â?¥0.*7 *3. Output Voltage: **0/**5/**0Vac or **0/**0/**0Vac Frequency Synchronized: ****4Hz or *0Hz�± 0.2Hz(Line mode)*0Hz�± 0.2Hz(Battery mode) Wave-form: Sine Wave Distortion: â?¤3% (Full linear load) â?¤4% (Full linear load) Overload Capability: **8%***0% for *0sec: â?¥**0% for **0ms Crest Ratio 3: *1 *4. Battery Type: Sealed Lead-Acid, Maintenance free Capacity: *2V/7AH*3pcs *2V/7AH*8pcs Back-up time: (Full /half load) 5mins/*4mins 9mins/*1mins 5mins/*7.5mins Recharge time: 5hours to *0% of full capacity after full load discharge *5. Transfer time: 0ms; 2.5ms typical from inverter to bypass and vice versa *6. LED indicators Status Battery level, Battery mode, Line mode, Inverter, Bypass, Overload, fault *7. Audible Alarm: Battery mode: Alarm beeps every four seconds, every second if battery low Overload: Alarm beeps two for every second Fault: Alarm beeps continuously *8. Acoustic Noise: At 1 meter distance *5dBA *0dBA *9. Communications DB*9 Connector: RS**2 Serial interface; Power monitoring and unattended systems shutdown via kavass***2 Intelligent Slot SNMP: Power management from SNMP manager *0. Network Surge Protection: RJ*5 I/O port available for *0base -T network or Fax/Modem *1. Environment Operating Temperature: ***0