Description

Technical Data MH****0 Stretch White for **0% Cotton Dark Fabric MH****0 is a good stretch, high opaque, economical, optically brightened, white underlay for printing on **0% cotton dark fabric. Mesh should be chosen to print the least amount of ink while still achieving the coverage desired. Wet Ink Tack Tack free After Flash Tack Decreases with increase in mesh count Surface Appearance Thick ink film Opacity / Viscosity High / medium Bleed Resistance None Gel Point / Flash Time **5°F (*4°C) / according to deposit Fusion Temperature **0°F (**0°C) Squeegee Hardness / Blade / Angle *0 � *0 Durometer / sharp / *5° Squeegee Speed Maximum Underlay Use ML****0 low bleed white for *0 / *0 polyester / cotton blends Emulsion Direct, indirect emulsion or capillary film Mesh Count *6 � **5 mc/in (*4 � **0 mc/cm) Modifiers and Additives See modifiers and additives section Storage *5°F to *5°F (*8°C to *5°C). Avoid direct sun. Exposure to temperatures in the **0°F (*8°C) range can cause some products to expand in their containers. Prolonged exposure to these conditions may cause bulging and leakage from the container. Opening the container and stirring the product before use may solve the problem. Cleanup Bio-degradable screen washes MSDS Substrate Type **0% Cotton dark fabric Special Recommendations These inks require heat for proper curing. Wash for a minimum of 5 wash / dry cycles to test for cure. Stir prior to printing. Do not dry clean. Do not use bleach. Do not iron printed image area. Clears and gels will cause yellow to migrate from formulations that are being overprinted. Formulate those colors to be overprinted without yellow.