Description

Optical Mirror-effect Ink Mirror-liked Ink is a new, special product which can provide different applications to traditional screen printing inks. It can produce electroplating effect on printed materials, even more perfectible than those produced by electroplating. Its shiny-metallic effect can tell the difference among other kind of inks. It is widely applicable on transparent packaging materials, advanced electric appliances such as audios, VCD players, washers, cookers, mobile phones, computers, cosmetic vessels, etc. Application Guide of Mirror-Effect Ink Raw Materials Synthetic resin + metal powder with special treatment. Diameter of Particles *0 Î&frac*4;m (D*0 approx.) Printing Materials PET, PC, PVC, PMMA (Organic Glass) Boiling Point *6 â�� (relative to degree of dissolution) Drying Conditions PC, PET Drying at **0 â�� to **0 â�� for *0 to *0 mins. *0 mins at higher humidity. PVC, PMMA Drying at room temperature, better performance at *0 â�� to *0 â��. Silkscreen Polyester with **0 to **0 mesh / inch (**0 - **0T) Hardness of Blade *5° to *5° Dilution With specific thinner completely stirred. Screen Washing With specific screen washing liquid. Storage Conditions Indoor with good drying conditions (Humidity *5% or below), for no more than *0 days. Memo: 1. All materials should be completely stirred before operations, since the weight difference of raw materials. Layer segregation might be taken place during storage. 2. Silkscreen with larger number of meshes should be applied, since the low tack of the ink. Best performance achieved with **0T to **0T. 3. Never operate in violent circulation environment, in order to prevent blocking. 4. The tension of the screen should be softer. 5. Prevent moisture during operations and storage, since the degree of shiny would be affected while water is absorbed.