Description

Power Surge TYD***0/**0BM (Surge Protection, Surge Protection Device, Surge Arrester, SPD, Power Surge, Surge Suppression, Surge Protective Device) Advantage >> Surge Protection, Lightning Protection, Surge Protection Device, Surge Suppressor, Surge Arrester, Surge Protective Device, Surge Protector, Lightning Solution, China Surge Protection Device Manufacturer, China Surge Arrester Supplier Products Details >> Product Description TYD***0/**0BM series surge protective device (in short: SPD, alias: surge protector, surge arrester) is suitable for TN-S, TN-C-S, TT, IT etc. power supply system of AC *0/*0Hz, �**0V, and used at the equipotential connection, which protects the electric network not shocked by the thunder and lightning, it�s designed according to GB****2.1, IEC******1, it adopts *5mm standard rail, there is a failure release mounted on the module of surge protective device. When the SPD fails in breakdown for over-heat and over-current, the failure release will help electric device separate from the power system and give the indication signal, green means normal, red means abnormal. Kevin wiring mode, remote-signaling output interface. It�s also could be replaced for the module when has operating voltage. Application Scope and Installation Position TYD***0BM, TYD***0BMseries surge protective devices are suitable for B grade lightning-proof, used at the equipotential connection of LPZOA or LPZOB and LPZ1 zone, which protects the electric network not shocked by the thunder. Notice: When you order our goods, please write the model and quantity carefully. For example: TYD***0/****5, 8 pieces. Main Technical Parameters Model TYD***0BM TYD***0BM Protection level Level B protection Level B protection Max. Continuous Operating Voltage Uc (V~) **5V Voltage Protection Level Up (V~) kV �2.5KV �2.5KV Nominal Discharge Current In(8/*0µs)kA *0KA *0KA Maximum Discharge Current Imax(8/*0µs)kA **0KA **0KA Response Time ns �*5ns