Description

Communication Signal SPD TYX-RJ*1 (surge protective device, SPD, lightning arrester, surge arrester, surge protector) Product Description TYX-RJ*1 series surge protective device (in short: SPD, alias: surge protector, surge arrester) is suitable for such as modem, DDN, fax and telephone, which protects the electric network not shocked by the lightning or surge over voltage. Product Features 1, Small section of return circuit, excellent protective performance. 2, Low residual voltage, response quickly. 3, Double protection of over-voltage and over-current. Application Scope and Installation Position These series Installed between LPZ1 and LPZ3, applied to the terminal device such as modem (ISDN, ADSL), DDN, electrograph and telephone. Being installed the RJ*1 interface, it can make up signal thunder and lightning defending box with many poles or return circuits according to the request of the customers. Notice: When you order our goods, please write the model and quantity carefully. For example: TYX-RJ**-RJ*1/CD**0 8 pieces. Main Technical Parameters TYX-RJ*1 AC**0 BC**0 CC*0 AC*8 BC*8 CC*8 AC*4 BC*4 CC*4 Rated Operating Voltage Un (VDC) DC**0V DC*8V DC*4V Maximum Continuous Operating Voltage Uc (VDC) DC**0V DC*0V DC*4V Protection Voltage Level Up (VDC) �**0 �*0V �*0V Nominal Discharge Current In (8/*0µs) kA 3kA Impulse Protective Voltage Ur(1kV/µs) �**0V Band Width MHz 2MHz Insertion Loss <0.5db Interface RJ*1 Protective Feet 3, 4 2, 5 2, 3, 4, 5 3, 4 2, 5 2, 3, 4, 5 3, 4 2, 5 2, 3, 4, 5 Protective Mode Full Protective Mode Response Time ns <1ns Material of Outer Covering Shield Aluminum