Description

Honeycomb Ceramic for RTOs Regenerative thermal oxidizers (RTOs) have gained acceptance world-wide as an effective and affordable VOC control method. To ensure reliable and economical operation these systems, proper selection of heat transferring media is a critical decision. Jiangxi Tianmei New Envriomental Material Co., ltd have been specialized in manufacturing heat media for several years in China.We are dedicated to supply the best heat meidia in China. Honeycomb Ceramic pruduced by Jiangxi Tianmei is the most efficient heat-recovery one for regenerative thermal oxidizers (RTOs). It is available in various ***** is a structrure media with high specific surface which packs more ceramic material into each cubic foot with less resistance to air flow. The result is a unique combination of high heat capacity, rapid heat transfer, and low pressure drop. Original equipment costs will be less when RTOs are built with Multi Layer Heat Meida. Our companyâ??s products can raise thermal efficiency to reduce RTO fuel consumption, or lower the pressure drop to cut fan power use-or both-depending on the amount of multi layer heat media installed per canister. Thus, operating cost are obvious reduced. VOC destruction efficiency improves when shorter bed depths effectively enlarge the combustion chamber, and decreased back pressure results in less leakage through switch valves. Maintenance costs are reducedby usingHoneycomb Ceramic in RTOs treating dirty air streams. Random packing media are unfortunately efficient particulate filters, but Multi Layer Heat Meida with its parallel flow channels allows more particulates to pass through the canisters and be burned up. The result is less frequent shutdown for media cleaning or replacement.