Description

Introduction: The OFI*3 Optical Fiber Identifier is a low cost, portable instrument designed to detect optical signals without disrupting traffic. During maintenance, installations, rerouting or restorations, it&#**9;s often necessary to isolate a specific fiber. By simply clamping the OFI*3 onto a fiber, the OFI will indicate if there is a signal, a Modulated Signal, or traffic and show signal direction. The OFI*3 is recommended for both 0.*5/0.9 mm bare fiber and 3mm jacketed fiber. When testing coated fibers, the slim design of the OFI*3 allows easier access to a splice tray where the amount of work space is limited. The clamping trigger is designed to fit the natural motion of the operator&#**9;s hand. A highly impact molded plastic case makes the OFI*3 suitable for use outside plant or in the central office. Features: Easy and convenient operation with a single keystroke Detecting three signal frequencies 2kHz,1kHz, **0Hz Displaying signal intensity Low battery reminder Concise LED light Two 1.5 V dry batteries (Mignon AA size) Interchangeable adapter heads(clamps) for jacketed and coated fiber. Specifications Recognizable Wavelength Range: **0 to ***0nm Recognizable signal type: CW, 2kHz, 1kHz, **0Hz within5% Detector Type: InGaAa 2pcs Clamp Type: H0.9/0.*5 for bare fibers ; H2.5 for jacketed fiber *: @******************** (Continuous Wave) ; > **5 dBm (Modulated Signal)