UNITMA carbon heating film is based on a continous resistive sheet providing heat evenly over the black surface areas.

UNITMA carbon film consisits of a specially formulated semi-conductive medium,coated onto polyester film.Power is fed to this resistive coating by way of copper eletrodesthat are fixed to the longitudinal edges of the heating areas.

This structure is insulated by a lamination of polyester based films that totally cover the element and is wider than the conductive heating area,forming strong clear edges that are designed to accept subsequent fixing to sub floor surfaces.

Low temoerature carbon floor heating films produces a gentle heat that evenly warms the entire room.Once the surfaces have been warmed,the heat is reflected resulting in comfortable ,natural warmth with minimum floor to ceiling termperature variation.

The conventional manufacturing way of carbon heating involves the fragmented processes of silk screening printing of the paste on to a PET laminex sheet. This sheeting is then subjected to high temperature in baking chamber. UNITMA film heater product is highly stable. It is also more resistant to heat and less susceptible to separation from pressure than any other product. 
In this way, UNITMA guarantees a better finished product because both the high quality conductive polymer material and the highly sophisticated manufactruing process are controlled by any source.

SPECIFICATIONS:

Product Features: