Description

Products Featureï&frac*4;� 1. **-bit PCI bus, PNP 2. The pulse output mode: single pulse (pulse +direction) or double-pulse (pulse + pulse), 3. Maximum pulse frequency 2MHz, 4. Support random**6axis linear interpolation, 5. Linear or S curve acceleration/deceleration 6. Change the speed and target position in real time during motion 7. Motion control card with a large-capacity buffer space, the maximum can save ***8 data 8. 6 axis stepping/servo motor control, each axis is controlled separately and wonâ��t affect the other 9. all 6 axises have position(encoder)feedback input, **-bit counting, the maximum frequency is 2MHz, the maximum counting range is *********8~**********7, *0. *-axis can be moving with the same stop, with hardware emergency stop function, high security *1. The multi-axis position of an external signal to trigger lock and memory function *2. Handwheel and external siganls operating function *3. *2 channels digital input/*2 channels digital output with optical coupling isolation, including two positive/negative limiting signals of each axis *4. Read the logical position, actual position, driving speed, acceleration and driving state in real time during motion *5. Each axis has two STOP signals used for origin, deceleration and coder Z phase search *6. Each axis has two **-bit comparand register, used for software limiting *7. Each axis has *-input signals, including two positive/negative limiting signals, two stop signals, one servo on location signal, one servo alarm signal and one universal input signal. *8. All signals except the two limiting signals can be used as universal input signal and the digital output *9. With a delay function can be set for delay time and delay state *0. Accept all signals from servo drive, such as coder Z phase signal, on location signal, alarm signal, etc. *1. Support up to *6 control cards, *6 axes in one system