Description

NO Description Parameter 1 Model ***0 2 Laser Power *0w 3 Laser Type Sealed CO2 laser tube, Low order modes, wavelength *0.6 with GB*******9 standards 4 Cooling type water-cooled 5 Engraving Scanning Speed *******0mm/min 6 Max Moving Speed ****0mm/min 7 Cutting Speed ******0mm/min 8 Highest Scanning Precision ***0DPL 9 Laser Output ****0software setting *0 Smallest Character Engraving Chatacter2.0mm�2.0mm, English1.0mm�1.0mm *1 Locating Precision �±0.*1mm *2 Supported File Format DSTPLTBMPDXFAI *3 Compatible Software TAJIMACORELDRAWPHOTOSHOPAUTOCADAll type of AUTOCAD Software in cloth CNC Router/Laser engraving machine Accessories included: (1)Water cooling system (2)1 air compressor (3)1 exhaust blower (4)1 honeycomb vaccum table (5)1 Laser software (english version) (6)1 User Manual (english version) (7)1 communiation cable (8)1 Power cable (9)3 reflect optics (*0)1 focus optic Optional configuration : Motorized up and down lift platform Rotary engraving device Dust collector system ***** area:( ***** JC***0 Laser machine )***0x**0mm, *8"x*2" inches , the length of material can be unlimited when 2 side door open. The laser head can adjust *0mm(1.5) up and down, material thicker than 1.5 should add a motorized up and down platform, it can up and down **0mm(*6 inches). That means the thick of material can be *6 inches. 2.High performance. Extreme precision. Solid reliability. Safe and easy to use. Remarkably versatile. Very ***** (1)Easy operation via PC and software - AI, BMP, PLT, DXF and DST files data formats can be processed. (2)No pre- or post-processing - The cutting edge has a very good surface finish and the top side is free of scratches. (3)Minimal influence on the material - no-contact processing allows no force effects. The zone influenced through heat is minimal and the material structure remains. (4)No tooling costs are incurred, as there is no wear and tear on the laser point. (5) Waste and noise levels are much lower than at most conventional machines.