Description

FA **9A carding machine � Aplications:processing cotton and man-made fibres or blends in length of ****6mm � Sliver count(g/m):3.**6.5 � Lap size(mm):max diameter **0 width **0 � Cotton layer weight by chute feed(g/m):*******0 � Production rate(kg/h):up to *0 � Delivery speed(m/min):*7.****6.2 � Total draft:*7.****8.5 � Licker-in speed(r/mm):**0 **0 � Doffer speed(r/mm):***4 � Cylinder speed(r/mm):**0 **0 **8 � No. of revolving flats(wording/total):*1/**6 � Flats speed(mm/min) cotton:**0.8 **4.1 **0.7 **1.9 **4.3 **4.8 **0.9 **8.9 Chemical fibre:*0.8 **9.1 **8.8 **0.6 **3.4 � Chrding segment under lick er-in:1 piece Post stationary flat:3 pieces Front stationary flat:3 pieces � Cansize (mm)diameter:**0 Height:**0 ***0 � Sution: Outlet of fan for vontinuous suction over card: All volume ***0m3/h static pressure**9~**8Pa Inlet of fan for intermittent suction over card&under card: Air volume ***0m3/h static pressure****0Pa � Total installed power:5.9kw � Space requirement (length*width):********6mm � Net weight(kg):approx:***0 l Three parents obtained:three stripper rollers devicemain driving systerm and filter chamber used for single-card; l Stepless variabe drive if doffer controlled by an inverter(an electronic frequency converter) l Feed roller is driven by an electronic frequency which permits stemits stepless variations of its speed and is comtrolled to the synchronized with the duffer driven by the PC l Adoption of belt driving with steady sunning and low noise l New tye of threee front stationary flats and three post ones l One set of carding segment installed under licker-in l New model and high quality metallic card clothing l Digital displayunit and contactless sensor showing technical parameters such as delivery speed, shift production etc. and iseveral automatic stop motion device l Continuous suction of four points of overcard and intermittent suction of system.