Description

Chuangxing W**8 Speed Electronic Jacquard Terry Towel Loom TECHNICAL SPECIFICATIONS Type of machine: Rapier weaving machine for terry cloth Loop formation: Mobile warp-fabric system achieved through the synchronous motion of the pressing roller and backrest. Nominal widths: **************************************0mm. Width range: standard **0mm, up to ***0mm is available on the request. Performance: Up to **0 picks per minute. Up to more than ***0 m/min of weft-insertion. Fabrics produced: All types of terry cloth. Yarn woven: Single or twisted warp yarns. Discontinuous weft yarn: Nm 2 to Nm **0 and continuous weft yarns:dtex ***0to dtex *0. Shed geometry: Reduced dimensions, symmetrical. Version: For single beam versions: ***-mm ground beam and ****-mm loop beam ****-mm ground beam and ****-mm loop beam. Quick beam release (both lower and upper). Number of colours: *****2 colours in any order. Weft-feed: Electronic speparate-coil weft feeder. Sley: Driven by positive coupled cam units. Weft density: Standard: from 4 to *4 wefts/cm. From 1 to **0 weft/cm on request. Different programmed weft densities in the patterns. Warp let-offs: Motorised positive let-offs with electronic control, timed with the fabric regulator. Fabric regulator: Motorised positive fabric regulator with electronic control, timed with the warp let-offs. Shedding formation: Electronic rotary dobbies (maximum *0 frames). Electronic Jacquard with cardan drive. Weft Pick-finding: Two-purpose motorised device with electronic control, can be programmed at will and also used for slow motion. Selvedges: Leno device binding with 2 ends. False selvedge and binding ends controlled by a separate device. Selvedge-tucking devices.