Description

* Auto-Sensor Sanitary Toilet Seat (Clean Cover) Clean Cover is developed for use in all public toilets where special sanitary conditions and low-maintenance are required: Airports, Hospital, Shopping malls, Hotels, Restaurants, Sports complexes, cultural and educational institutes, government buildings, office buildings, train and bus stations, etc. 1) Power: 6~*2V hard wire or battery 2) Dimension: **0mm * **0mm * **0mm 3) Drive : 6~*2V D/C geared motor 4) Components - The seat-ring encased in a Cover**0 plastic sleeve film - Motor module to drive the reels - The two reels to feed and rewind Cover**0 plastic sleeve film. - The housing separated upper and lower contains the reels and power module - The seat-ring is attached to lower housing 5) Operating when activated by the wave of a hand on the housing cover mounted sensor, Seat**0 dispenses a sleeve film from the fresh Cover**0 roll. At the same time, the used sleeve film is cut as it is drawn onto the rewinding reel in the housing It is easy, touch free! 6) Replacing Cover**0 Replacing Cover**0 sleeves is very easy. When the roll of clean Cover**0 sleeves is used up, simply replace the empty roll with a new Cover**0 sleeve. It takes not more than a minute and requires no special equipment of training. Please refer to our home-page &#**9;seat**0 com&#**9; for more information on our products.