|
Welding head and the conversion mechanism is the fixture part of
the vibration system can adjust the vertical motion, all the guides
and bearings are maintenance free. To avoid the soldering tool for
contact between the anvil head surface, we use an adjustable stop
switch. Once the welding pressure loss, which will be welding head
spring tool automatically reset to the main location, the main
location of the sensor monitoring.\\
Vibration system consists of: transducer, horn and welding head
tool
Solid shaft with pressure ring will be fixed in the rotating body
vibration system, the welding head tools, horn and transducer by
special screws, removal is simple and convenient, horn and welding
the first practical application of tools can be adjusted frequency
of the vibration system is independent, welding head tool wear
parts, line driver is part of the vibration system to provide
variable speed control.
1. Constant amplitude generator self-balancing, automatic tracking
frequency, (no air-cooled generator circuit system)
2. All the welding mode, pressure control and pressure both
functional classification system.
3. In a variety of welding modes have been increased by fine-tuning
on the basis of the depth of welding mode control system.
4. Set has an external signal input / output can be directly
connected with the automatic system of mechanical systems with
5. Can weld the basic model of time, energy, energy compensation,
or peak power welding modes system.
6. The model of ultrasonic metal welding system applicable to all
types of soft metal product
|
