Description
High-pressure Cold Paint Road Marking Truck is high-end marking
equipment with high efficiency and high quality that can choose
trucks with different trademarks and different weights as its
mounting platform according to customers’ different needs and is
more safer and environmental protection. The main parameters are as
follows:
1. Engine: *7HP water-cooled electrical starting diesel engine with
three-cylinder in-line that is environmental protection with low
noise. The fuel tank cubage is **0L.
2. Paint Pump: Equipped with double hydraulic-driven plunger-type
spraying pumps. Maximum flow per pump: *0L/min. maximum spraying
pressure: *0Mpa.
3. Paint Tank: Equipped with single tank with two rooms (cubage
***0kg/room that can be extended and the II-type paint tank is
pressure tank); equipped with hydraulic-driven erect vane stirrer.
Gear pump in the bottom of the tank provides convenience of feeding
paint into the tanks.
4. Spraying Gun: I-type is equipped with 4 new-type pneumatic
spraying guns and 1 manual spraying gun with lengthening pipe with
reverse washed nozzle (*2/*0 or *0/*0). II-type is double equipped
with air spraying gun with wide wheel and receiving vat to make
sure the line-edge well-trimmed and beautiful with high efficiency
of ****0km/h.
5. Available Paint: Applying to spray cold solvent, water-based and
two-component road marking paint.
6. Glass beads spraying system: Equipped with double **0L
pressurized glass beads bin with windows that can uninterruptedly
spray glass beads. Single or double glass beads spraying guns can
be equipped on the left or right that can freely adjust its
pressure, flow rate and spray width to ensure the spraying glass
beads firmer, evener and more economical.
7. Electronic Control: TT-KZ**0 PLC micro-electronic control system
can freely change the line types such as single or double
continuous line and all kinds of broken lines. And the following
functions can also be equipped according to the users’ needs: paint
volume measuring, line length and area measuring and line thickness
reminding to make the marking operation convenient and fast.
8. Road cleaning and Pre-Marking system: Road cleaning and
pre-marking can be done at the same time of marking operation,
multiplying the marking efficiency
