Description

CZECHO Electronics Plus CT - cotton

CZECHO Electronics Plus FT - filament

Air-jet weft insertion: Main nozzles, relay nozzles, profile reed

Machine suitability: Fabrics production normally woven on air jet weaving up to **0g/m2

Processed materials: Staple, filament

Warp materials range: Spun yarn: *****0 tex (***5,3 Ne)

Filament yarn: *****0 dtex (*****0 den)

Weft material range: Spun yarn: *****0 tex (***5,3 Ne)

Filament yarn: *****0 dtex (*****0 den)

Take-up regulator range: from 2 to *0 weft/cm

No. of weft measuring devices: 2 or 4

Insertion control: Electronic control

Control system: Industrial computer system

Required air pressure at machine inlet: 0,7 MPa

Instaled output electromotors: 5,5 kW main motor + 0,*5 kW warp regulator, + 0,*8 kW take-up regulator, + 0,*5 kW ventilator

Machine output in weft meters/min-max.: 1 **0 (width **0 cm)

1 **0 (width **0 cm)

1 **0 (width **0 cm)

1 **0 (width **0 cm)

1 **0 (width **0 cm)

1 **5 (width **0 cm)

1 **0 (width **0 cm)

Weft insertion rate - weft/min: To **0 (width **0, **0, **0 cm)

To **0 (width **0 cm)

To **0 (width **0 cm)

To **5 (width **0 cm)

To **0 (width **0 cm)
 

Reed width - max.: **0, **0, **0, **0, **0, **0 or **0 cm

Reed width reduction: Max. *0 cm

Shedding motion - possibilities: Crank up to 6 shafts - only for machine widths from **0 to **0 cm

Cam up to *0 shafts

Dobby positive motion up to *6 shafts

Selvedge motion . possibilities: Rotary: Tuck in device

Turn-over motion

Warp regulator: Electronic

Take-up regulator: Electronic

Automatic pick remover: Optional – only for FT

Central greasing: Optional

Warp beam flanges - possibilities: **0, **0 or 1 **0 mm

Max. diameter of fabric winding in loom: **0 mm

Batching motion: Optional. Batch diameter according to the motion type.

Special additional equipment: Tandem nozzles, stretch nozzles, selvages melting-off, central cutters, weft double segment feeler

Machine dimensions: height 2 **0 mm

width 4 **0 mm (**0 cm), ***0 (**0 cm), ***0 (**0 cm), ***0 (**0 cm), ***0 (**0 cm), ***0 (**0 cm), ***0 (**0 cm)

depth ***5 mm (with warp beam **0 mm)

High level parameters can be achieved provided that suitable yarn, weave, equipment and technological preparation are used.