Description

The typical performance of the BA-LV Oil Purifier is as follows:

• Reduction of water content of the oil in a single pass by 0.***1.5%, depending on the oil inlet temperature, and the type of cooling system selected.
• Ultimate reduction of water content through recirculation of the oil through the purifier to zero free water content and depression of the soluble water content to *0 PPM below saturation level.
• Removal of soluble gases and air to *0% of the saturation level.
• Particulate matter removal: *9% of particulates over 5 micron with interchangeable filter elements having particulate selectivity of 0.5% or 1 micron for lower viscosity oils.
• Optional acid correction with fuller's earth filter.
• The mineral and synthetic oils with viscosities from ***2,**0 SSU at **0 degrees (*****0 CS) can be handled with the regular BA-LV Models. Higher viscosities up to **0,**0 SSU can be handled by special BA-LV models on request.

The outstanding performance of the BA-LV purifiers:

• Can be used on both mineral and synthetic oils, regardless of specific gravity.
• Can break difficult (permanent) emulsions.
• Collect condensed water and other distilled liquids.