Description

***0 Mitsubishi *0” 7 color with Back printer unit

Serial # *8XX, Installation date    Middle ***1  *3 million revolutions / *5 million impressions, Back printing unit with Tower Coater Extended delivery, *8" press raise with Bandstand, MMT Continuous delivery, Continuous Feeder, Nordson UV drying system, 3 lamps interstation, 4 docking stations 1,2,6,7 3 lamps end of press, Fuchs DeVries IR Drying package, Hybrid Rollers, Grafix Sprayer, Baldwin Recirculators, Baldwin Blanket Washers, AWS Chiller for Chilled Vibrators, Delta Dampening, Automatic Ink,, Roller Washup, 8pt. - *2pt. press, Skeleton Cylinders, *3,**0 Sheets per hour, Multi Dampening 3 position dampener,,Double size impression and transfer cylinders, Motorized Microprocessor controlled segmented Ink fountain blades, COMRAC control console, GTI D***0 Viewing lamp, Remote, digital control of plate cylinder Circumfrential, Lateral, and Cocking (skewing), Toyo Drive Motor, Automatic Sheet size Preset, Automatic Printing pressure preset, Mitsubishi pin system, Stack Aligner in the delivery

This press has 3 uv interdecks you can put in spot 1,2 ,6 or 7 It also has 3 uv lamps in the delivery.

***9 Mitsubishi 3F*6 6 Color *8x*0  Mitsubishi Dampening, COMRAC Console, Grafix powder spray, Hebert IR Dryer, Royse R/R,Plate punch, Plate cocking, Sheet Decurler, Auto presets, , High Pile Delivery,  Counter reads **8 Million. 

***6 Komori L**0RP   *8x*0" Five Color + Back Printer + Coater

5 units + back printer, Coating tower, IR Dryer, Extended delivery, Komorimatic dampening, PQC Console, PDC-S scanning, KMS monitoring and AMR (for paper size and thickness presets), Autoplate, Plate Cocking, circa *1 mill. imps., No Auto Washers, No UV.First unit needs new jacket and patching on cylinder. Current owner only uses the first unit  for sheet cleaning. Press prints quality work.

***8 Komori L**0+C with full UV, SAPC, ABW, AIRC, AMR Pre-sets, Plate Cocking, Royse tanks, Tri-service chilled vibes, *2” raised kit, 7 UV lamps (3 end of press; 4 interdeck with docking stations in between every unit), Approx. **0 mil imps

***4 Komori S***-P  4 Color*0x*9  Convertible perfector (4/0, 2/2) Auto perfecting changeover, PQC remote ink and register console with light, CIP*3 capable via floppy disc, KPC auto plate changers, Auto ink roller and blanket wash, Komorimatic Delta-type dampening system, TresuRoyse recirculation, Dry spray unit, Suction feed board, Manufactured *2/ ***3, Counter reads *0 Million

***0  Komori L**8  *0x*8   Semi autoplate, chrome back and plate cylinders, Bottcher rollers. Pierry IR Dryer, console, plate cocking,  X-Rite densitometer , *8 MIL IMP,  EXCELLENT Condition,well maintained  $**5,**0 EX SITE

**0V/ *0HZ, **5 AMP, *-Phase

***5 Heidelberg GTOF-S Machine is in very good running condition with no cylinder or gear damage. Machine is stream feed rated for *2,**0 impressions per hour.  Includes CPC console, IR Dryer, Royce recirculators, and Alcolor dampener.  Machine does not have a perfector.  Machine has **5 million impressions, can be inspeced running. $**0,**0 EX SITE OR BEST OFFER

***3 Heidelberg SORKZ with Dalgren *4 million impressions. $*5,**0 lot

***0 Heidelberg SORKZ *9” x *5.5” Two-Color Conventional Dampening System, *7 mil imp.$*1,**0 lot

***6 shinohara Model *6IVP  *9 x *6 four color perfector High pile feeder and delivery,IR dryer, Console, automatic plate cocking system, automatic blanket wash system, automatic quick plate clamping system, still hooked to power, *5 million impressions

***9 Heidelberg SORD s/n *****8 Conventional damps with RoyseNo Damage  Shows *5 mil imp

***7 Heidelberg SORDZ   2 Color   *5" x *6" Alcolor Dampening  Royce R & R

Pierry IR Dryer, Weko Spray Powder, *5 Million Impression , Impeccable Condition, Press can be print tested. $*9,**0  ex site

***4 Sakurai Model **2EPII *0 x *8 High Pile Automated Two Color Perfector with Auto Plate Changers, Plate Cylinder Cocking, Auto Ink Wash-up, Auto Perfector Changeover, Spray Powder Device and Color Console. (*5mm impressions). THE PRINTER IS ASKING FOR BEST OFFER

***6 Ryobi **4  4 Color, *4 x *0 Ryobimatics, Console w/Register and Ink key Controls, Royce, Refrigeration/Recirculation, Powder Spray, *3 Million Impressions. $*9,**0 ex site

Solna **5, bought new in ***7.  Superblue, Oxydry, low useage, clean.   Last *0 years not run very hard. 

***9 Ryobi **4HX  4 Color *4 x *0 Ryobimatic Dampening System, Running register from the delivery, Powder, Spray, IR Dryer, Royse R/R, Roller Wash, Optical plate punch, Tools and, manuals, No auto plate,  *1 Million Impressions. $*5,**0 ex site

***2  Muller  Panda II  *1 pkts, 9 clamps, **0 trimmer inline(older), new glue pot, side glue wheel, pile cover feeder.  All connecting conveyors, 3KT. Ran production at ***0/hour.  Updated drive?.  Dust collection?. Can demo for serious buyer, under power, not run since ***0  

***7 Rosback Model **6V ****6" Air Feed  Scorer Perforator equipped with Micro -Perf **- excellent Condition *-

***8 Heidelberg PROSETTER ****6*2 CFF Stitcher serial # SL**7  6 POCKETS 2 HAND FEED POCKETS, COVER FEEDER, THREE KNIFE *@********************ine in very good condition. One owner  w/RIMA Rima RS *0 S  stacker   model  **-S**3"

***4 Heidelberg  MOFP*5color  CPC**2,  PERFECTOR 2/3 Standard Damps  *3 MILLION IMPRESSIONS NO DAMAGED one owner shop closed Very nice press

***8 Kodak Magnus **0 CTP includes  New never used Kodak filter system & New never used Chiller Photos enclosed ***8 Magnus **0 CTP plate maker W/ ***7 **0 PLATE STACKER  MODEL CSG**6C VOLTAGE **0/*0/*0 WEIGHT *5KG New never used Kodak filter system New never used Chiller   

***0 Hamada B**2A with console, 4 color press, semi auto plate loaders, *4X*0, *2 million impressions, Automatic Blanket Washers, Hamada Continuous Dampening System, Automated Plate Mounting, All new digital control system to control water, ink press set-up and shut-down, Vacuum Register Board, Stream Feeder with Sheet Feeding Mod, Upgraded air compressor

***7  Ryobi **2,  *8.5 million impressions, Kompac,  dampening system,  IR dryer $*2,**0 LOT

***9/***0 Heidelberg SORD  factory rebuilt by heidelberg in ***5 , only *7 mil imp since rebuilt.SERIAL # ***9xx.  It has high pile feeder, size is *5.*5 x *5 EXCELLENT CONDITION!!$*2,**0 lot MUST SELL FAST SHOP CLOSING

***4 GTOZP, CONVENTIONAL DAMPS

***3/***4  Model Ryobi **2PF, Serial No. ***9   Three Phase ,Voltage **0V  Frequency 6C HZ  Wattage 8KW  Counts - *0 million. 

2 Hamada **0 2 colors press and 1 Hamada  **0 for sale all are in good condition,  and 1 Hamada **0 few part missing but good machine, $***0 ex site for 4 machines.

KATANA SCREEN FT-R***5 (SEPT ***0)  SCREEN LD-M***0 Processor  Compose Express RIP

COMING SOON

***8 CD **2 LX

***1 KOMORI **0

LINOTYPE **0 AND 2 HAMADA **0 IN ONE SHOP

1 GTO *6 AND 1 GTOZP *2 IN ONE SHOP

***6 SHINOHARA ***4

***8 Shinohara *6IV straight 

***4 CREO LOTEM **0

***4 CREO LOTEM II QUANTUM APPROVAL XP4