Description

Features:

- **0 MHz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG*2 / H.**4 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V.*4/RS**2 Interface
- *0/**0Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- DVI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC*3)
- *4 MByte Flash, **6 MByte RAM
- SATA
   - for use either as internal SATA HDD 2,5?
   - or to use for extern eSATA

- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder
- extern *2V power supply

DreamBox DM**0 technical data

DBS-Tuner mit DVB-S2:

Frequency Range  **0 .... ***0 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... *5 Mbaud/s, SCPC/ MCPC
DVB-S2: *0 ? *1 Mbaud/s (8PSK) , *0 ?*0 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG*2 and MPEG*1 compatible, H.**6
Video Formats 4:3 / *6:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG*1 & MPEG*2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz

Output analog:
Output Level L/R 0,5 Vss on **0 Ohm
THD > *0 dB (1 kHz)
Crosstalk < **5 dB

Output digital:
Output Level 0,5 Vss on *5 Ohm
Sampled Data Filtering *2 kHz, *4.1 kHz, *8 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an *5 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm
Teletext filter in conformity with ETS **0 **2 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS **2:
Typ RS**2 bidirectional
Bitrate **5,2 kBit/s max.
Plug Connector SUB-D*9
Function: Update of Firmware

Ethernet:
*0/**0 MBit compatible interface
Function: Update of Firmware

Analoge modem:
analoge modem for Internet connection

SATA Interface:
   - for use either as internal HDD 2,5? or eSATAor internal 2,5" HDD

USB
2 x USB 2.0 Host

LNB power and polarisation per tuner:
LNB Current **0mA max.; short-circuit-protected
LNB Voltage vertical < *4V no load, > *1,5V at **0mA
LNB Voltage horizontal < *0V no load, > *7,3V at **0mA

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption:
< *5W at *2V

External PSU
Input:
******0V AC / ****0Hz / 0,6A
Output:
*2V = / 3,0A

Physical specification:
Ambient Temperature **5°C...**5°C
Humidity < *0%
Size (W x D x H): **5 mm x **0 mm x *0 mm
Weight: 1,8 kg  without HDD