Description

Electric vacuum pump to help brake booster

Some customers feel that no Supplemental brake system will work on a tow vehicle unless the brake booster has vacuum when in tow. Night Shift Auto has come out with a vacuum pump to power the brake booster to help customers through this dilemma.

The pump is only activated when the brake booster drops below ***0mmHg. The pump will then stay on until it reaches ***0 mmHg.

Electric car without an engine, you must use the electric vacuum pump to push the booster, new energy vehicles, parts must be installed.

Electric vacuum pump for *2V - designed for brake booster vacuum systems of electric vehicles.

This vacuum pump is a certified automotive part from the leading manufacturer. Operating voltage is 6V - 8 V

Vacuum pump must be involved in an electrical circuit through the auxiliary relay with relevant vacuum-operated switch. The pump is not designed for continuous operation always after go up to prescribed pressure in the brake booster system, the pump must be turned OFF.

The external relay must be connected so that after the pressure decrease in the system, vacuum pumps switching ON and fill vacuum.