Description

Structure characteristics
1.Equipment structure takes up stainless steel plate plus (****0) power for hull painting. It not only has good profile, but also has fine corrosion resistance.
2.It utilizes imported closed-type compressor unit imported from Europe and USA, which has solid and durable structure and is endurable and can greatly enhance service property and life of the equipment; it takes up advanced energy-saving design, which can save electric power by *0%, save water by *0%, and it uses HFC refrigerant that will not harm human body and nature, you can conduct test in safe way;
3.It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by **0%, and you can experience the novel control feeling; 4.It utilizes most powerful and reliable PLC and special modules in the industry circle. *0 programs and ***0 steps are provided for user to make setting/storage and running;
5.It utilizes protection module for safe voltage, the withstand voltage can reach **0V. After energizing the equipment, the equipment will not be burned and it can protect the equipment by **0%.
6.It takes up high-sense FastAIT monitoring and refrigerating system imported and achieves effective control and management for refrigerant volume;
8.It has automatic safety protection switch, which has high sensitivity, can detect any state, cut off protection and give alarm in shortest time and assure safety of the personnel and equipment;
7.It utilizes the advanced USB storage device in the industry. It is the only one for using the USB interface for storing data. It has not only large storage capacity and fast transmission rate, but also is portable, has great supporting property and is convenient.;
8.It can separately raise temperature, reduce temperature, humidify and dehumidify, it utilizes BTHC flat constant temperature and humidity regulating mode;
9.The radio tele-monitoring system takes up IPC/SCADA architecture LAN network interface, it can connect to more than **0 equipments at the same time, and it can avoid the complex wiring and eliminate the regional limit;
*0.Large temperature and humidity range: *0~*8%RH, the moisture can reach within *0%RH after installing the dehumidifying device;
*1.It has air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.
Control system:
TEMI**0 touch-key type temperature and humidity programmable controller
Operating interface: LED display
Temperature and humidity controller: touch-type LED controller 
Setting mode: touching type
Running mode: setting-up running and programmed running
Program: **0 groups in ***0 sections
Resolution: temperature: ± 0.1 ℃; humidity: ± 1%RH
Input: platinum thermal resistance
Control mode: PID control
Communication function: LAN network interface
Additional function: alarm and display function, power-off protection function, upper limit temperature alarm function, timing function (auto startup and auto stop), self-diagnosis function, curve record and display function, paperless record, USB data export, tele-monitoring and so on.
It can execute **0 STEP X *0 PATTEM mode.
Each section can be grouped and executed in crossing way.
The execution time for each section can be set up between ****9H plus *9min.
For setting up for each group, it can circulate within ****9 in part or entirely for option.
In execution, it can select group circle picture or section execution picture and can know the remaining time for execution.
It has power-off function. After power recovery, it can complete the remained test.
It can select single-section control or multi-section programmable control.
The screen has backlight time control function and it can adjust the backlight brightness.
For executing single-section control, it can change the execution value at will. The memory-type multi-function control has automatic control output functions, such as heating heater and humidifying heater for electromechanical solenoid valve for different groups of refrigerating compressors and so on.
·Water supply
Water supply mode: water lifted by pump
Water supply port: convenient front water supply port
Water storage tank: built-in stainless steel fixed-type water storage tank (with a volume about *5L)
Safety device
Humidifier dry-combustion protection, independent over-temperature protection, water shortage protection, over-current protection, refrigerant high-pressure protection switch, over-current circuit breaker, earth leakage protection and so on.
·Operation ambient temperature: ＋5～＋ *0℃
·Power supply：AC**0±*0%V *0±0.5Hz single-phase double-wire + protective grounding wire/ AC**0±*0%V *0±0.5Hz three-phase four-wire+ protective grounding wire
Accessory
1 cable hole (Φ *0,) cover, 2 sets of shelf, 2 protector tubes, 1 overflow water tube, 1 copy of operating specification
·Optional accessory:
recorder, tele-monitoring software
Note:
1. The products above can be customized according to demands of the clients;
2、The technical parameters above are the data obtained under room temperature of *0℃ and non-load condition