Composite corrugated roofing sheet are widely used in
warehouse,greenhouse,steel instructure,supermarket,kitchen and so
on.The mainly specification as bellows:
warranty year:above *5year
Glass Fiber: Adopting Taian high- quality glass fiber, the content
no less than *0%.
Unit Weight: ***0g/sqm ***0g/sqm ***0g/sqm
Nominal Thickness: 0.8mm, 1.0mm, 1.2mm 1.5mm 2.0mm, 2.5mm
Heat Resistance Limit: **0 to ***0
Light Transmittance: *5%( light green) *3% (cream white)
Anti- ultraviolet Rate: *9.9%
Tensile Strength: **0Mpa
Flexural Strength: **0Mpa
Cracking Elongation Rate: 1.9%
Pasture Hardness: ≥ *0
Thermal Expansion Coefficient: 2.2X*0 *5cm/cm/
Thermal Conductivity: 0.*8W/m k
Warranty: *0 years
The Technical Standard of High-quality FRP
1. Good tenacity. No cracking phenomenon when driving nails in roof
installation
2. Having close combining with color steel plate. Cross- section
thickness is uniform. The shape of FRP is consistent with steel
plate.
3. Transmittance loss rate is low. No yellowing phenomenon after
long term service.
4. Thermal expansion coefficient is close to that of steel plate.
No cracking and water leakage in nail driving place because of
expand with heat and contract with cold.
5. Light through FRP assumes scattering shape and gentle.
6. Bright and clean appearance, no distinct air bubble and cracking
on FRP.
7. Anti- ultraviolet and anti- chemistry corrosion.
8. Anti- ageing and anti- pulverization.
9. Long service life.
