Description

Self-Adhesive fiberglass tape adopt high quality fiberglass fabric then coat acrylic acid copolymer,Finally cutting to finished product.It is mainly used to mend dryplate wall,gypsum board cauking,and all kinds of wall’s breaking and other breakage of wall surface.Due to chemical performance of fiberglass fabric is stable and oxidation resistant,So the Self-Adhesive fiberglass tape we produced have other similar product incomparable superiority.

Features

●Excellent alkali-resistant performance ,durable in use
●High intensified drawing force resistant,deformation resistant and preventing breakage
●Excellent self-adhesive ,simple and convenient
●Excellent bonding ability,easy operation
Specification
Main specification :mesh size:8×6,8×8,9×9,*0×*0,*2×*2mesh/inch(mainly C-glass plain woven)
gram :*5g/ m***0g/ m2
Cutting size:width:5cm,*0cm,*5cm,*0cm or wider
length: *0 meter, *0 meter,*0 meter and longer
colour: white(standard colour) ,yellow,green etc.
Note: customized specification is welcome

Operation Procedures
1.wall space should be kept clean and dry
2.attaching adhesive tape and pressing tightly in the breaking point of wall
3.confirming the breaking point has been covered by adhesive tape,then cut the redundant adhesive tape,finally brushing mortar
4.let the adhesive tape dry naturally,then polishing lightly
5.filling enough coating ,let surface smooth
6.cutting uncovering adhesive tape, to make sure all the leakage point have been mended ,then using the slight composite embelishing around leakage point,to make it bright and clean as new.