Description

Product Description

HYM**0 is Impinj INDY R***0 single port high performance UHF reader module. 
With Impinj R***0 chip, the item shows excellent working. 
It is high performance reader module, suitable for developing high level long read range UHF handheld, integrative reader, fixed reader and other UHF reading device. 

Description 
HYM**0 UHF RFID reader module uses R***0 chip, which complies with EPC C1G2 protocol, its working frequency is **0~**0MHz, with LBT function. 
Different region frequency could be selected by software. 
It supports dense reader working mode (DRM). 
Fixed power is *0dBm. 
With standard 8dBi antenna, the reading distance can reach *0 meters, maximum identifying speed can reach **0/S; 
With simple power supply and interface circuit, a high performance RFID system can be established. 
It is suitable for logistics, costume, medical industry, and complex assets management, etc. 

Technical Data 
1 Fixed current: 1.5A 
2 Standby current: ≤ 1mA 
3 Frequency range: **0~**0 MHz, software selected 
4 Default working frequency: Frequency hopping 
5 Channel bandwidth: ≤ **0 kHz 
6 Frequency hopping speed: ≤ 2 s 
7 Fixed power: *0 dBm 
8 Stepping interval: 1 dB, (from 5~*0dBm, adjustable by software) 
9 Label protocol: EPC C1G2/ISO******6C 
*0 Communication protocol: Asynchronous serial ports protocol 
*1 Starting time ≤ *0 ms 
*2 Radio-frequency power rising time: ≤ **0μ S 
*3 Radio-frequency power dropping time: ≤ **0μ S 
*4 Max reading range: *0 meters with 8dBi antenna 

Size and Weight 
Size: *5.9 X *5.6 X 6 (MM) 
Weight: *0 g 

Characteristics of DC 
Minimum Voltage of power: 3.6 V Direct current 
Maximum Voltage of Power: 5 V Direct Current 
Characteristics of DC 
Data Mini value Typical value Max value Unit Remark 
Voltage of power 3.6 - 5 V Direct current 
Input high level 2 3.3 3.5 V GPIO 
2 - 5 V EN 
Input low level *0.5 0 0.5 V GPIO 
- - 0.*8 V EN 
Output high level 2.3 - 3.3 V GPIO 
Output low level - 0 1 V GPIO 
Enable current 2 5 *5 uA VEN≥ 2V 

Environment Requirement 
1 Working temperature: **5~**5 C degree 
2 Storage temperature: **0~**5 C degree 
3 Relative humidity: *0%~*0% RH 

Interface Definition 
Interface Definition 
Pin Signal name Signal direction Function/compatibility description 
1 VCC Input Module supplying power 
2 VCC Input Module supplying power 
3 GND - Module connecting ground 
4 GND - Module connecting ground 
5 EN Input Module enabling, highly effective 
6 GPIO Bidirection Generic port 
7 GPIO Bidirection Generic port 
8 GPIO Bidirection Generic port 
9 UART_RX Input Asynchronous serial interface receiving 
*0 UART_TX Output Asynchronous serial interface sending 
*1 DBG_RX - Test port 
*2 DBG_TX - Test port 

If you have further question or request on this product, please feel free to contact us.