Description

Linear machines featuring a central oven and 1 or 2 carriages. They enter into the oven for cooking and then travel to a cooling station for cooling and extraction of the moulded parts.

Limited operating space.

Increased loading capacity. The mould-holding arms are supported at the two ends.

The same arm can perform consecutive cycles while the other arm has stopped production in order to interchange a straight/offset arm or because production tests are being performed.

Airtightness of the oven is not achieved by using doors, but with fixed panels assembled onto the carriages, optimizing the sealing of the oven and reducing cycle times.
 

The most economical way of exploiting all the advantages offered by this technology.

Specifications:

• 2 – 3 stations: an oven and 1 or 2 cooling and loading/unloading stations;
• Open cooling stations with floor level fans;
• High load capacity carriages;
• Interchangeable straight or offset arms;
• Possibility of multiple indexing of the arm’s position at the end of the cooling phase to facilitate loading/unloading operations;
• Direct rotation movements using robust gear mechanisms, driven by inverter controlled AC motors, with settings for rotation speed, acceleration/deceleration ramps;
• Possibility of using up to 4 airways;
• Burner powered with different fuels;
• PLC control system.