Description
ES Series Precise chemical injection at low cost High speed
operation Up to **0 strokes per minute results in high resolution
chemical feed, elimination of slug-feed effects. Compact size Ideal
for OEM specifications, ES pumps are small, quiet, and lightweight.
Double ball check valves The ball, seat and guide assembly ensures
a tight seal to prevent loss of prime. Long lasting diaphragm PTFE
laminate over EPDM is molded onto a solid core. A retainer plate is
provided to minimize flow rate changes as pressure varies.
Specification Max. discharge capacity **0 mL/min Max. discharge
pressure 1.0 MPa Main materials PVC Stroke rate 0 to **0 spm Power
supply AC **0 V single phase Liquid temp. range 0 to *0 C deg.
Viscous liquid Please contact us for details. Slurry liquid Cannot
be handled. EHN Series The latest electromagnetic metering pump
equipped with digital controller & multi-voltage Multi-voltage
power source Multi-voltage power source from AC**0 to **0V for all
models. You are now free from worrying about power voltage. High
resolution Thank to digitized controller, stroke speed can be
adjusted by 1 spm step from 1 to **0 spm. Combined with stroke
length adjustment, you can do the fine adjustment from very small
flow to maximum flow rate. Pump head variation Wide variety of
standard pump head (VC/VH), automatic bleeding type (NAE) and high
compression type (*5 model). Note : Refer to page 4 for details of
NAE and *5. Air vent valve Small flow capacity models (EHN**0, *5
& *0) equip air vent valve. Air in the pump chamber can be
easily released by turning knob. Water/dust-proof Each unit such as
driving unit and control unit is sealed to make the pump IP*6
equivalent water/dust-proof. Note : Do not install pump outdoor.
Specification Max. discharge capacity **0 mL/min Max. discharge
pressure 1.0 MPa Main materials PVC Stroke rate 1 to **0 spm Power
supply AC **0 to **0V *0/*0Hz single phase Liquid temp. range 0 to
*0 C deg. Viscous liquid Please contact us for details. Slurry
liquid Cannot be handled. Functions of the controller EXT
operation: Multiply (1 : n), Dividing (n : 1) STOP function LK
Series Applicable to the many diverse needs of chemical feeding
Easy to use, multi-purpose design This series includes the most
economical and general-purpose pumps in our metering pump series.
In fact, the first metering pump in Japan to use a PVC-molded pump
head belonged to this series. Three types of standardized
connections "flanges, hoses, and unions (0.2 kW type only)" as well
as a full line of accessories are available. What's more, parts are
manufactured at low cost and designed to be easy to use. Highly
durable pump drive unit The pumps in this series use a
worm-gear-type speed reducer which, though compact, is highly
rugged and reliable. Since this unit is fully closed, oil-bath
lubricating type, it can be installed outdoors. At the same time,
it exhibits superior durability over long-term continuous
operations. A wide variety of pump models and material compositions
This series includes nine of exclusive motor types and ten types of
general-purpose motor types. This extensive lineup covers a wide
range of application needs, involving everything from trace to
large amounts of fluid. What's more, the pump head is manufactured
using various materials including PVC, fluororesin, and stainless
steel, making the pump useful for almost all chemical dosing needs.
Specification Max. discharge capacity *5/*4 L/min Max. discharge
pressure PVC, PVDF: 1.0 MPa, SUS: 1.5 MPa Main materials PVC, PVDF,
SUS**6 Required power range 0.2 to 1.5 kW Liquid temp. range PVC,
PVDF: 0 to *0 C deg., SUS: 0 to *0 C deg. Viscous liquid ***0mPa•s
(VS type) Slurry liquid Max. lime slurry *5% (depending on model)
MD Series Highly reliable, compact magnetic drive pumps Highly
reliable, compact magnetic drive pumps. Field-proven reliability A
large number of pumps in this series have been delivered to
customers at home and abroad, earning high acclaim for their
superior reliability. This is the best-selling series in the world.
An incomparable range of models available The MD series comes in a
total of *8 models. A wide range of flow rates, hose connections,
and threaded connections (M type) are available as standardized
models. In addition, dedicated high-head, large-flow-rate models
are available. The most economical and suitable pump can be
selected from this wide variety of models. Leakage-free, sealless
structure As is common with corrosion-resistant pumps, this series
uses the magnetic drive method, eliminating problems caused by
liquid leakage. Superior corrosion resistance The pumps in this
series are constructed mainly with polypropylene while at the same
time using superior corrosion-resistant parts manufactured from
ceramics, PTFE, and FKM. Therefore, they can be used to transfer
strong acids and various other chemicals. Simple and compact The
pump structure is extremely simple. Consisting of several unitized
parts, the pump is easy to maintain. Specification Max. discharge
capacity **5 L/min Max. head *4.3/*0.3 m Main materials MD: GFRPP,
MD-V: CFRPVDF Required power range 3 to **5 W AC**0V, **0V Liquid
temp. range 0 to *0 C deg. Specific gravity limit Up to approx. 1.3
(depending on model) Sealing method Seal-less construction MX
Series Reliable & energy efficient magnetic drive pumps
Self-radiating structure (PAT.) Through heat-dispersion holes
provided in the fixed portions of the impeller and the magnet
capsule, the liquid around the spindle and the bearing is forced to
circulate so that heat generated by sliding can be reduced
effectively. Thus, thermal deformation and melt are prevented.
Non-contact structure By installing the driving magnet and the
driven magnet in an inventive way, the movement of the magnet
capsule is controlled by magnetic force to prevent the rear thrust
and the rear portion of the bearing coming into contact with each
other continuously even during dry running. This structure reduces
heat generation and secures lubricant routes. (Except MX**0, **0)
Volute casing divided into two sections (PAT.) The MX series is the
first resin magnet pump which uses the pump casing divided into the
front casing and the rear casing to form a vortex chamber as an
ideal form. Therefore, the internal leak phenomenon, which means
that the liquid getting out of the impeller returns to the pump
casing and is suppressed to a minimum and the liquid is efficiently
guided to the discharge port to enhance overall efficiency. Robust
structure All stress bearing portions, such as the front and rear
casings, are reinforced by means of ribs to improve the pressure
resistance and the mechanical strength of the pump. The bearing is
not only fixed by conventional press fit but is also sandwiched
between the abutting portion in the depth of the magnet capsule and
the rear end of the impeller to improve its reliability under high
temperature. (Except MX**0, **0) Specification Max. discharge
capacity **0 L/min Max. head *5/*7 m Main materials MX: GFRPP
Required power range 0.*5 to 2.2 kW Discharge bore G1 to *0 mm
Liquid temp. range 0 to *0 C deg. (*0 to *0 C deg. for Aflas® O
ring.) Specific gravity limit Up to approx. 1.2 (Please contact us
for details.) Sealing method Seal-less construction