VST-aluVFR-RZH(Inorganic
Materials)
INTRUDUCTION
VST-RZH ,are our
company developed low carbon environment-friendly exterior
insolation series products,it can achieve energy conservation about
*5%. The VST-RZH can instead the traditional insolation foam
board,and have lower *0%**0% cost than traditional material.its
fire-proof performance can reach Grade A.It is very suit for
industrial and residential buildings insolation both in server cold
and burning hot area,it can use in the the insolation of
roof,basement wall,garage,fire fighting
access.ect.
The VST-RZH can float and
press polish in one time ,so it is very easy to construct,saving
material and installing time. Its working principle is : saving sun
energy daytime (latent heat) *0w/m2h**5w/m2h when temperature is
higher than VST-RZH material,how much the VST-RZH can absorb the
sun energy is different in different ares as different SDM ,and
when the temperature is lower than VST-RZH material,it can release
the energy to keep the temperature standard,in this way ,the
VST-RZH material absorbing and releasing sun energy to
insulation.as its special standard design,the VST-RZH can to be a
kind of air conditioner .
The VST-RZH is widely suit
for kinds of buildings such as:
residence,villa,garage,restaurants,office buildings,school
buildings,hospital,hotels,and kinds of needing insolation
buildings(vegetables greenhouse,cereal drying,poultry hatching
flower greenhouse.ect),comparing the normal buildings ,using
VST-HZR can saving about *0% electricity which use to insolate.It
absolutely change the efficient of the heating,and an excellent
saving energy performance.
VST-RZH
performance
1、excellent of heat
insolation
The thermal conductivity of
it is very little, but the storage coefficient is huge,and the bond
strength is great,it is both insolation and friendly-environment
for using in kinds of buildings.
2、great
safty
“VST*-RZH”is very light and
fire-proof, and it can reach non-burning A standard, at the same
time, it can cohesive the basement tightly and can resistant impact
and wind . The wall will not be broken or hollowing as the high
temperature in summer and the low temperature in
winter.
3.friendly-environment and
suitable for living in.
“VST*-RZH”selected
non-toxic,no smelling and non-pollution inorganic material to
produce, it is ventilate for wall,so it is suit for living
in.
4.superior
price
“VST*-RZH”developing
reflected the high comfortable but low cost and low wast, it is the
core principle of the VST-RZH,it absolutely can replace the
traditional insolation materials such as EPS,XPS,PU.
Ect.
④Specification
and usage
Specification
1、VST*-RZH-A type: powder
slurry,it is used in exterior wall for insulation
,sound-proof,water-proof,fire-proof and storing heat ,it is suit
for the south hot area(the storing heat temperature is
*5±5℃).
2、VST*-RZH*-B type:powder
slurry,it is used in exterior wall for insulation
,sound-proof,water-proof,fire-proof and storing heat of exterior
wall,it is suit for the north severe cold area(the storing heat
temperature is *5±5℃).
3、VST*-RZH*-Ctype:powder it
is used in interior wall for insulation
,sound-proof,water-proof,fire-proof and storing heat ,it is suit
for both south and north area(the storing heat temperature is
*0±5℃).
4、VST*-RZH*-Dtype:powder.it
is used in expressway,airport runway and the place having ice
covering ,storing heat temperature is *5±5℃,it is suit for
extremely hot area (Saudi Arabi countries)
5、VST*-RZH*-Etype: solid
section. It is used in oil pipeline,steam pipeline,insulation
pipeline in chemical factory, the storing heat temperature can be
selected according to different needing.
VST*-RZH normal solid section
specification
**0×**0×*5mm
**0×**0×*6mm
VST*-RZH partition wall
specification
***0×**0×**0mm
***0×**0×**0mm
***0×**0×*0mm
***0×**0×*0mm
***0×**0×**0mm
VST*-RZH six functions
mixing(decoration,A grade fire-proof,water-proof,heat
insulation,storing heat and cold insulation)
**0×**0×*5mm ***0×***0×*0mm
*0×*0×*0mm
I. VST*-RZH Thermal storage
and insolation products physical performance
form(1)
No
|
Item
|
unit
|
standard
|
results
|
1
|
density of
powder
|
Kg/m³
|
≤**0
|
**3
|
2
|
density of
slurry
|
Kg/m³
|
≤**0
|
**0
|
3
|
linear
shrinkage
|
%
|
≤0.3
|
0.*4
|
4
|
fire-proof
rate
|
%
|
*0
|
*5
|
5
|
absorption
rate
|
%
|
≤*0
|
4.8
|
6
|
moisture
content
|
%
|
≤*5
|
*3.9
|
7
|
Fire-proof
grade
|
A Grade
|
A Grade
|
<font
styl
|