Description
A. Functions
GSM Quad-band frequency (Global use);
Wide input voltage range: DC ***4V;
Build-in vibration sensor, Smart Anti-theft
(Optional);
ACC ignition detection, vehicle status notification;
External SOS button, used in immergence case use;
Build-in back up battery, support illegal main power cut-off
alarms (Optional);
External Relay, used to cut off engine power or oil
remotely;
External Microphone, used in voice monitoring case
(Optional);
External Loudspeaker, used in phone calls or alarms case
(Optional);
B. Technical Parameter
GMS frequency: **0/***0MHz or **0/***0MHz;
GPRS: Class*2,TCP/IP;
Voltage range: DC ***4V
Standby Current: ≈0.2mA;
Power Consumption: 0.5w/h;
GPS initialization: Cold boot *8s (Open sky)
Warm boot
2s (Open sky)
GPS Accuracy: *0m(2D RM);
Working Temperature: *2℃ - **0℃；
Working Humidity: *0%**0%RH;
Dimension: *0.0(L)**5.0(W)**5.0(H)mm;
Net weight: **3g;
C. Terminal Operations
1. Start-up/Shut-down
Start-up: insert the SIM card, turn on back-up power supply,
the terminal will start up;
Shut-down: disconnect power plug, take out the SIM card, the
terminal will shut down;
2. Terminal parameters settings
All beginning letters in each parameters’
commands shall use upper-case letters, all punctuations shall
be English punctuation, only part of commands will
reply.
By sending enquiry commands to the terminal,
corresponding contents will be replied.
Commands shall be sent by the bound cellphone
number.
Cellphone SIM Card Number Binding
After the terminal start up normally, please
bind your cellphone number first, alarms will send to this bound
number.
Send SMS: *ZC+terminal password# Cellphone SIM
card number#Terminal SIM card number
Initial password is *****0, command start with *
e.g.: *ZC*****0#**********9#**********2
Password Modification
Send SMS: *MP+Previous terminal password+new terminal
password (6 numbers)
e.g.: *MP***********4
Initial password is *****0, new password is
*****4
Get Terminal Position by SMS
Send SMS: DW to terminal, it will reply the terminal
current geography location
e.g.: south east *0 meters, ABC company, Meilong Rd, Shenzhen,
Guangdong Province
Google Address Link
Send SMS: GOOGLE to terminal, it
will reply the terminal current geography location link.
Please note: the default time is Greenwich time, actual time
needs to add your time zone number
e.g.: enquiry time is *2:*0:*0, Chinese time is *0:*0:*0 (+ 8
hours)
Vibration Alarm
Send SMS: SF to turn on the vibration
alarm
Send SMS: CF to turn off the vibration
alarm
Engine Control
When the vehicle was stolen, the administrator
can send Cut-off Engine command via the live tracking monitoring
system, Under the conditions of safe driving, the command will
trigger the relay to cut off power of oil pump to stop the engine,
and it can’t be re-start the engine without restore engine
command.
To secure the safety of vehicle, the terminal shall in valid
GPS signal status, also speed under *0km/h or still status to cut
off engine.
After the theft alarm dismissed, send restore
engine command via live tracking monitoring system will trigger
relay to restore the power of oil pump, the vehicle will able to
start up.
Cut off Oil pump power
Send SMS: DY+password to terminal, and
reply config ok
Restore Oil pump power
Send SMS: TY+password to terminal, and
reply config ok
Initial password is *****0
e.g.: DY*****0,TY*****0
SOS Alarm
Any emergency case happens, press the SOS button
for 3 seconds, trigger the SOS emergency help alarm, the terminal
will call the bound cellphone number repeatedly, in nobody answers
case, it will ring max 3 times, at meantime, the terminal will
upload SOS alarm information to live tracking monitoring
system.
Main Power Cut-Off Alarm
After the terminal main power been cut, it will
automatically trigger power cut off alarm, it will send a main
power cut off alarm SMS to bound cellphone, and meanwhile upload
the alarm information to live tracking monitoring system.
SMS e.g.: Alarm main power failure, please pay
attention!
Voice Monitoring
Send SMS: JT to the terminal
The terminal will call back and the
administrator will able to monitor the voices.
Phone Calls
Bound cellphone calls the terminal, after
it gets through, the administrator can talk with the driver via the
loudspeaker and microphone connected with the terminal.
D. Live Tracking Monitoring Platform
Language Available:
English, 中文, Español, Français, Português,
Deutsch, العربية, Vietnamese, ภาษาไทย, Pусски.
If you already have an login account and
password information, you can login our platform directly, or
please contact your distributor and ask them to open you an account
and provide you the password.
Input the address link in your computer broswer,
input the account and password, then login to your service
platform.
