FOB Price
Get Latest Price|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
250 Gallon
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
Other
Contact Person Mr. Steve
6940 Tremont Road, Dixon, California
| PRODUCT DATA COLORS |
| Virgin Available in assorted stock colors. |
| Low Odor Custom colors and specialty |
| Environmentally Preferred products are available. |
| Excellent Quality |
| Semi-Gloss Finish V O C |
| Excellent Adhesion MAXIMUM VOC |
| Easy Application |
| DRYING |
| · To Touch *0 - *0 minutes SURFACE & APPLICATION |
| · To Re-coat 4 - 6 hours |
| · Times may vary depending WOOD: Clean, dry & dulled surface optimal. Remove |
| on environmental conditions, all loose & flaking paint. Remove loose |
| Temperatures & humidity Unstable wood fiber. Prime all new wood |
| with appropriate primer. |
| PHYSICAL PROPERTIES |
| · Finish: SEMI GLOSS METAL: Clean, dry & dulled surface optimal. Prime |
| ****0% *@********************sp; all new metal with appropriate primer. |
| Approximately *5% Volume Solids Surfaces to be rust free, and clean from |
| · Package Viscosity *****1O KU all forms of contaminates. |
| · Approximately ******0 sq. ft. per gal |
| · 1.5 to 1.7 Mils DFT MASONRY: Clean, dry & dulled surface optimal. |
| Allow ****0 days for all new masonry |
| to cure and to provide proper pH |
| APPLICATION METHODS before priming & painting. |
| Product may be applied with brush, roller or airless sprayer. |
| Maintain a 'wet edge" and apply coating uniformly. Do not CAUTION: |
| Apply if material, air or surfaces Temperature is below *0° F Avoid CONTACT WITH SKIN & EYE’S. NOT |
| Surfaces and ambient temperatures must be between *8° F TO TAKE INTERNALLY. WASH THOROUGHLY |
| and **0° F 5° above dew point and remain above *8° F AFTER USING PRODUCT. ADDITIONAL SAFETY |
| a minimum of four hours after application. Test all & HANDLING INFORMATION AVAIABLE WITHIN |
| products for compatibility prior to application MATERIAL SAFETY DATA SHEETS (MSDS). |
| KEEP THIS AND ALL PAINTS OUT OF REACH THINNING & CLEAN UP FROM CHILDREN. ALWAYS USE IN WELL |
| Product is supplied without the need for thinning VENTILATED AREAS.KEEP FROM FREEZING. |
| MAXIMUM ½ pint per gallon added if thinning is required. IRRITATION FROM PAINT TO EYES, NOSE, SKIN |
| Clean up with warm, soapy water. COULD OCCUR. FLUSH EYES FOR *5 MIN IF |
| EYES COME IN DIRECT CONTACT AND |
| COUNSULT PHYSICIAN IMMEDIATELY. |
| PREVIOUSLY PAINTED |
| Surfaces to be painted should be clean, dry & dull before painting. Surfaces should be washed, rinsed, and free from oil, dirt, mildew, flaking or loose paint. Fill all voids with substrate specific patching materials. The longevity and success of any paint job begins with a clean, sound and properly prepared substrate. For additional product recommendations and surface preparation please call (**6) *******9 |
