Description

Test Procedure                                                                            Test device together with urine samples, controls should be brought to room temperature prior to testing.                                                                                          1. Remove the test device from the foil wrapper.           2. Remove the cap from the test device.                        3.Hold the midstream test with the exposed absorbent tip pointing downward directly into urine stream for at least *0 seconds until it is thoroughly wet. Do not urinate on the test and control windows, or plastic device.                                                                      4.After removing the midstream test from your urine, immediately replace the cap over the absorbent tip, lay the midstream test on a flat surface with the test and control windows facing upwards, and then begin timming.                                     5.Read the results at 5 minutes, DO NOT INTERPRET RESULT AFTER *0 MINUTES.