Description

Composition: Acrylic resin cover, plastic meter body, Bakelite terminal plate. Two stud mounting
 
Color: Transparent cover, Grey meter body, white scale plate.
 
Scale Plate: The normal scale plate is made of alloy-aluminium material white printed with black
scales, Values, units, technique symbols, etc.
Scale plate with special requirements are available upon request.
Such as color, scale with lighting functions and PVC noctilucence are available upon
request.
 
Pointer: Normaly, the pointer is made of alloy-aluminium, it is black, and red, white are available
Upon request.
 
Anti-static:All meters are subject to anti-static treatment to minimize the static-effect to the
accuracy ofthe meters.
 
 
Accuracy:Class1.5, 2.5;
 
Service condition:**0~**0 degree;
 
Operating position: Generally, meter is installed in vertical position. Other installation position can
be customcustomized (please specify the desired angle). The accuracy class
is just valid for theCorresponding installation mode.
 
Insulation Test: The test Voltage for series is 2KV RMS for 1 minute with the frequency *0Hz.
 
Safety Precautions:Meters with damaged bezels or glass faceplates must be disconnected from
the mains. Scale plate, front frames and windows may only be replaced under
voltage-freeconditions.
The meter should be kept clean, if the meter is used in a manner not specified
by themanufacturer, the protective function may be impaired