Description
ROCKWOOL(MINERAL
WOOL)
【Description】
The rockwool products are manufactured from a molten mixture of
natural rock bonded with a thermosetting binder. They offer
outstanding thermal insulation, fire protection, sound control and
personnel protection properties. All products are manufactured to
the strictest international quality standards.
The rocks are melted in furnace
using coke as fuel at approximately ***0
℃, and the molten lava is fiberized by
the use of four water cooled spinning wheels. The fibers are then
coated with a thermosetting binder which, when heat cured, bonds
the fibers into a mattress. The mattress is then cut into suitable
sizes for packing.
Relatively small rigid pieces
(eg ***0X**0 mm) are called slabs, large pieces (eg ***0 X **0 mm)
are called mats, Slabs and mats can be produced in a range of
densities and thicknesses. Typical densities range from *0 – **0
kg/m3. Thickness range from *5mm to **0mm in single layer.
Preformed pipe section is produced by raking the uncured wool from
the line and moulding it around a mandrel of the same size as the
pipe to be insulated. The moulded pipe section is then heat
cured.
Rockwool slabs, mats and
preformed pipe sections can also be supplied with a wide range of
factory applied surface finishes, such as aluminum foil, glass
cloth and wire mesh.
【Products list】
1.Rockwool Slab
2.
Rockwool mats with or
without galvanized metal wire mesh
3. Rockwool pipe sections
4. Granulated Wool
