Description

Outdoor waterproof container for mounting wind logger,remote control and remote monitoring unit inside and protecting it from the elements. 

Or you can used it for other electronic equipment. 

Waterproof box parameters 
product color: The gray box body 
product performance: Waterproof and moistureproof 
shape size: **0 * **0 * **3 
Waterproof level: Super waterproof, protection grade reaches IP*6 above, even in the job also not fill with rain, very safe. 
Product material: New material imported from Taiwan, high quality of thermoplastic plastics ABS or polycarbonate (PC), or you can according to customer's request to choose the material first, can be customized resistance fuel, uv material, carries on the transparent and opaque two forms (no corrosive materials, anti-static, insulation plus) 
Product use: Waterproof connector box is mainly suitable for indoor and outdoor electrical, communications, fire equipment, steel smelting, oil chemical industry, electronics, electric power, railway, construction site, mining, quarry, airport, hotel, ships, large factories, coastal factories, terminal equipment, sewage discharge waste water treatment, environmental hazards, etc. 
Case thickness: Box body place 3 mm thick, on average, the thinnest thickness to strengthen the important parts of the deformation (won't), the impact strength IK*7 unbreakable (pressure); Flame retardant grade where V0. (highly resistant to bake, use for a long time not faded), light (convenient) 
Product certification: Products through the CE certification, material can do (such as environmental protection, flame retardant, UL material certification), waterproof grade IP*6 certification test pass. 
Installation method: 
1. Inside the box - internal for the circuit board or DIN rail components installed convex sets, and built-in copper wiring nut (each within the box is equipped with a minimum of two or more very regular M4 copper nut) 2. The external press pack, can through the lower part of the box body mounting holes directly fixed on the wall, can be through the four corners of the box, with screws or nails directly fixed on the wall or on the board.) 
The service life of the waterproof box: 
Conventional materials according to use environment different typically within five years or so, if you have any add flame retardant materials and age resister antioxidants life can reach more than *0 years. Thermal deformation temperature: - *0 ~ ~ *5 degrees. 

Note: when assambled and deliveried with our wind logger, remote control or remote monitoring system, a DIN track and some waterproof connectors will be mounted.