Description

Ferrite Pot Magnet Flat

Ferrite Pot Magnets Flat are the pot magnets which were composed by Sintered Ferrite magnets and outer steel flat round shape shell. The magnetic circuit of the Sintered Ferrite magnet inside and the shell could achieve a great holding force, which makes a great help for you to hold any iron parts you would like to. They are often used as tools for various activities in workshops and in industry. They can be used for holding work pieces whilst welding, cutting, milling or drilling etc. Because of the lack of moving parts and the robust construction of ferrite pot magnets flat, the life is unlimited and no maintenance is required. Just keep the pole surface clean guarantee reliable operation and a long life.

For the standard dimensions of the Ferrite pot magnets flat, the diameter we normal produce is from *0mm to **5mm, the thickness is from 4.5mm to *6mm, the holding force is from 4N to ***0N. Also we could design and produce the Ferrite pot magnets flat according to the dimension and holding force you required. Please note, the holding force of ferrite pot magnets flat which indicated on our catalogue is based on the magnets retaining force against a direct pull when offered to a clean ground mild steel surface with a minimum thickness of *0mm. Painted or uneven surfaces will reduce this force, pot magnet working in shear will support approximately 1/3 of the stated value.

The coating of the outer shell could be Ni, Ni-Cu-Ni, Zn and so on, prevents the Ferrite pot magnets from corrosion. Further more, special packages, such as skin package, plastic clamshell with paper card, could be supplied according to your specific requirements.