Description

USB Touch Control Dimmer Lamp LED Light
Feature
1) With creative design and nice shape
2) Using the LCD backlight LED which is with ultrathin, super light and safe function
3) Can insert to the USB interface with any side of this LED module which is convenient and practical
4) The working current is only about **0ma, less than 1w, which can meet the requirement of lighting for a long time
5) Small size, easy to carry
6)Strong commonality which can work well with any ordinary USB device

Note: Since the USB lamp is with lower power consumption, it cannot work with some mobile power supply which with the automatic power outages function. Because that the mobile power supply will be held that there is no loading.Some of the computer operating system which has the power management, will not suppy external power when there is no recognition to the device.

Parameter
1). The power supply voltage: 5v
2). Current: **0ma (5 v)
3). Power: 0.9W
4). Product size: *0 * *2 * 3.3 MM

Directions for use

When the power is ON and press the touch for more than 1.5 seconds), it will be on circulation dimming status.
A). If its OFF state, itll change to the circulation dimming status from the minimum brightness.
B). If in the ON state, the circulation dimming status start from the current brightness.
C). If the cyclic dimmer transferred to the highest brightness, and you continued to press it, itll change from the lower brightness automatically.
Long Press it after it transferred to the minimum brightness, it ll change to the high brightness. If youd like to adjust it to the brightness you needed, please just loosen hold of it.
If you loosen hold of it during the long press condition, itll keep the current brightness. Then continue to long press, it will be dimming in a reversed direction.  The purpose is helping to return to correction the dimming if the brightness surpass your required in the process of long press.