Description

CPC High Pressure Integrated Pressure Solar Water Heater: A9H model with EN12976,SOLAR KEYMARK certificate

Model NO: A9H-8  A9H-10  A9H-12  A9H-15  A9H-20

Specifications:

1. Power output sharply increased by the CPC concentrators

2. Two modes suitable for both summer and winter;

3. Fast assembly CPC more easier disassembly;

4. No water inside tubes, solar system can work normally when tubes broken;

5. Multifunction frame both for slope or flat roof, more beautiful inclined roof installation;

6. Temperature startup more faster than the normal solar system;

7. 24h(whole day) high pressure hot water outlet;

8. 316L SS socket perforation solution, no leakage;

9. this model has got the EN12976, SOLAR KEYMARK

CORE TECHNOLOGY:

1. Socket-high erosion resistant 316L stainless steel,one-time formed by stamping molding. No welding point,totally preveny perforation by the bad water quality;
 

CORE TECHNOLOGY:

1. Socket-high erosion resistant 316L stainless steel,one-time formed by stamping molding. No welding point,totally preveny perforation by the bad water quality;

2. Two models option according to the local climate: take off CPC reflectors in summer to prevent overheating; Install CPC in winter can get the higher sunlight absorbing;

3. Polished mirrior CPC concentrators, parabolic curve sunglight accumulated, 360 vacuum tube absorber, much more power output than the normal solar collector;

4. Super heat pipe faster startup, high pressure working, new structure nylon tube caps make the installation more easily;

5. Connection in tank back side, more convenient for the slope roof installation, more safer by the special heating element box.

Technical Parameters:
1. Vacuum tube: super conducted heat pipe(without water);

2. Insulation tank: Stainless Steel 316L pressurized inner tank;

3. working pressure: 6bar;

4. T/P valve: 6bar/99℃;

5. Working principle: direct working withstand pressure;

6. Frame: slope and flat roof multifunction;

7. Assistant function: electric heater(optional part).