Description
We offer high quality
edged / unedged birch lumber, cut from quality white European
(Baltic) birch. We set our suppliers higher requirements for
delivery, so we can be sure about the quality of our goods that we
send to our clients. Quality and customer satisfaction is our
priority.
♦ AA / AB / BB / ABC grades , cut out from good quality logs
either dry or fresh, diameter from *2cm+up , red heart plank will
not exceed 5% of total quantity , and about this 5% red heart plank
only in one side.
♦ We can do any width (min is *0mm) , and be aware of that
we are not allowing negative tolerance!
♦ Thickness : *9/*0/*1/*2/*4/*5/*8/*0/*2/*3/*5/*8/*4/*5 mm -
be sure that we work only with positive tolerance 1mm*2mm.
♦ Length is up to 6.0m (most of the time we supply 2.**3.0
meter long boards) and up with positive tolerance **0mm , not
allowed negative tolerance.
♦ Measure of width is made, after kiln drying, in the middle
of the plank on the top side from bark to bark and if it is fresh
then it is also made in the middle of the plank. Moisture is
***2%.
♦ Width is marked on each plank, all measurements are pointed
in specification which is provided with the load accordingly .
We accept inquiries
for edged / unedged birch lumberof any size demanded by customer,
so do not hesitate to make inquiry!
You can ask any
questions concerning material & purchase at any time specified
in contacts, we will be pleased to serve You!
Best Regards,
Tomass Freimanis
CEO - Balt Wood Enterprise
