Description
OZONE ABRASIVES LIMITED
PRODUCT DATA SHEET
AbraClean Garnet is a natural sandblasting mineral, derived from
Almandine garnet grains which are known for natural hardness and
durability. The combination of the high density and physical
properties make Garnet natures most highly efficient, effective and
safe abrasive for both wet and dry
blasting applications. Its excellent
for coating adhesion, as well as
applications where low or no transfer of grit into the substrate
can be tolerated.
Product Identification
Product
names
: AbraClean Garnet
Size
: Garnet *0/*0
Other
names
: ToughClean Garnet, PowerClean Garnet, AbraJet Garnet
Advantages of AbraClean Garnet
• Wide range of grades and compositions are available
for different jobs and different profiles on surface
• AbraClean grains create a uniform profile virtually free of
embedment, providing an excellent surface for coating
adhesion
• The consumption is low compared to its effectiveness which makes
it one of the most costeffective.
• Non-toxic inert and natural, crystalline silica levels are
less than 1%.
• Recyclable up to 4 times
• Low dust levels helping the environment and the manpower involved
in blasting.
• It helps to clean the surface fast and easily with the
desired level of finishing.
• Its non-reactant, will not interfere with your
coatings
• Its non-porous and will not draw moisture
Usage
• Tanks and other confined spaces where use of a low dusting
abrasive is necessary.
• Dry docks, Bridges, Shipyards - a great abrasive to use where
water contamination is a concern.
• Aluminum and Fiberglass surfaces
• Powdercoating, denim blasting
• Industrial Painting
• Waterjet Cutting
Garnet- Fe3Al2(SiO4)3 :
*7.2
%
Rutile :
0.1 %
Zircon- ZrSiO4 :
0.2
%
Ilmenite- FeTiO3 :
1.8 %
Calcium Carbonate- CaCO3 :
0.*0
%
Quartz-
SiO2 :
0.2%
Typical Sieve Analysis
Sizes
% Retained
US
Mesh
MM
*0/*0
*0/*0
*0#
#*2
1.**0
-
-
-
#*0
0.**1
**5
-
-
#*0
0.**5
****0
**1
-
#*0
0.**0
****5
****0
-
#*0
0.**7
***0
****5
***5
#*0
0.**0
-
****5
****5
#*0
0.**7
-
***0
****5
#**0
0.**0
-
-
***0
****0% variation is allowed in typical sieve analysis
Typical Chemical Analysis
Chemical name Proportion (%)
Al2O3
ZrO2
*1
SiO2
*0
FeO
*6
Fe2
O3
2.9
TiO2
1.0
ZrO2
0.*1
P2
O5
0.*3
Cr2
O3
0.*4
Th+
U
**0 ppm
Other Characteristics
Radioactivity
…………………Non-detectable
Copper…………………………<0.*1%
Moisture
absorption………..Non-hydroscopic
Sulphur………………………..<0.*1%
Free Iron
……………………….<0.*1%
Other Heavy Metals…………<0.*1%
Hardness
7.5 to 8 Mohs
Chloride
Max *5 ppm
pH
>7
Bulk
Density
2.*4 T/m3
Specific
Gravity
4.1
Melting
Point
****0C
Grain
Shape
Sub-angular
Packaging Options
Packaging is available in 1MT and 2MT Jumbo Bags.
Country of Origin : India
