Application
Accent and display lighting for retail, commercial and hospitality environments

Features
Pull LED Trim and Trimless Multiple Recessed Downlights
Offered in 4 configurations: *-light; *-light; *-light; and *-light
Can be fully recessed or semi recessed heads that allow for higher aiming angles
Allow for **-degrees across, with a **-degree tilt and a ***-plus degree rotation.
Combine the aiming flexibility of track with the look of recessed, maintaining a more consistent, inconspicuous aesthetic and more compelling experience for end-users.
High performance lighting applications are effectively achieved from above a smooth, uninterrupted surface, for a clean, unobtrusive aesthetic.

Construction
Die-cast aluminum heat sink painted white, black, silver or customized finsh.
Trim, housing and junction box are *0 gauge steel.
Frame and  hanger bars are heavy gauge galvanized steel.

J-Box
Seven knockouts and four Romex® style wiring connectors provided for ease of installation.
Rated for branch wiring.

Mounting
Luminaire can accommodate up to 1 ceiling thickness.
Luminaire is supplied with butterfly brackets to allow up-to 3 vertical adjustment.
Compatible with C-channel, flat bar, wood joist bar and EMT. Bar hangers must be ordered separately.
C-channel is recommended for T-bar ceilings.
Max. Ambient temperature: **2°F (*0°C).

Electrical
Electronic constant current LED driver,
**0v - **7v input ELV and Triac dimming standard
**0v & **7v ***0v and Lutron systems also available
LED mounted to die-cast / extruded aluminum heat sink
Rated life of *0,**0 hours L*0 based on LED testing per LM*****8 and projected values using IESNA TM****1
***0K, ***0K, ***0K and ***0K
>*0 CRI

OPTICS
*2° Spot,
*4° Narrow Flood,
*6° Flood
Customized

Dimming
Dim to *0% with electronic low voltage (ELV) dimmer (**0V only).
***0V dimming for **0V and **7V

Electrical constant current LED driver
Over voltage, over current and short circuit protection
This product complies with IEEE C*2.*1 for surge endurance up to 2.5KV.
Additional surge protection recommended.
Damage from power surge is not covered by warranty.
Power factor >.9, *0/*0Hz

Emergency (available)
Emergency driver operates LED load of up to 7.0 watts at a nominal **0 lumens for a minimum of *0 minutes.

Listing/Warranty
ETL listed to US and Canadian standards for damp locations.