Description
Product Description
The Product is comprised of Auto Nozzle, Photo Sensor, Bellows and
High Pressure Generator. It is easily installed at any place
including the automated production lines, assembly lines, mobile
LCD optical lens lines and injection film lines. The Product is not
only removes electrostatic, but also dust at the same time. In
particular, the Photo Sensor attached to the Nozzle Head detects
objects to spray air or ion automatically thereto for enhanced user
convenience.
Application and Effect
1.Removing electrostatic and dust from plastic and injection
products;
2.Removing electrostatic and foreign materials from electronic
products and precision optical devices;
3.Removing electrostatic and foreign materials from LCD and display
products;
4.Removing electrostatic and foreign materials from mobile
parts;
5.Removing electrostatic from precision and electronic products,
and PCB;
6.Removing electrostatic and foreign materials before
printing
Method of Use
1.Power the Auto Nozzle. (AC**0V)
2.Connect the air hose (8).
3.Fix the position by moving the Bellows up or down. (DO NOT turn
**0o as it may cause breakdown.)
4.Turn on the power switch and place a part in front of the Nozzle.
The Sensor will detect the part and start
spraying it with ion and air to remove electrostatic and foreign
materials.
5.As air is sprayed, electrostatic is instantly
removed.
6.The sensing distance can be adjusted within the range of *0mm ~
**0mm.
(To be adjusted at the center of the Sensor.)
Caution
1.Clean and remove, periodically (once a week), foreign materials
from the ion needle on the Nozzle to prevent
deterioration.
2.Wet the cotton buds or brush with alcohol to clean the
needle.
3.Turn power OFF when cleaning the ion needle. (be aware of high
voltage)
4.Do not get the ion needle in contact with metallic
objects.
5.Do NOT adjust the ion balance as it may jeopardize the ion
balance.
(It is factory set, and it does not need to be
adjusted.)
Specifications
Nozzle Size
**0**5L
Air Pressure
*1~8kg/㎠
Head
- Black acetal specially processed
Ion Discharge Needle -Tungsten 1.5MM
2EA
Sensor Range
- Photo sensor Min *0mm~**0mm
Nozzle Joint(length) - **0mm *7
knuckles, 3/DC Power Controller
Input voltage
- AC**0V, *0/*0 HZ
Output Power
- 7 KV DC TYPE
Power Consumption - *5W
Ion balance
±*0V
Weight / Dimension -
1.5Kg /**3(w)**5(h)***4(d)mm
Case Material
- EGI/painted
Input Air
-
1~8kg/㎠