Description

Co-star is a professional manufacturer of sintered SmCo and NdFeB magnets with certificates of ISO***1:***8 and ISO/TS****9:***9.

ALL MAGNETS ARE CUSTOMIZED!

BLOCK MAGNET:
General size range: L: 0.9 - **0mm, W: 0.9 *0mm, H: 0.3 - **0mm
Max block: Rectangular/L**0 × W**0 × H*0mm , Square/L**0 × W**0 × H**0mm
Longest magnetized direction: **0mm
Min block: L0.9 × W0.9 ×H0.3mm

Note: Generally speaking, for block, if you would like to keep one larger dimension, the other dimensions have to be narrowed accordingly; if you need two larger dimensions, too thin thickness is not allowed, because the great brittleness of SmCo easily causes fracture when assemblying . Please contact relevant technical support for details.

LOAF MAGNET:
General size range: W: 2 - **0mm, H: 1 - **0mm, L: 1 - **0mm
Max Loaf: W**0 × H*0 × L**0mm(Large W/L ratio), W**0 × H*0 × L**0mm(Large L/W ratio)
Min Loaf: W2 × H2 × L1mm

Note: For large loaf, any thin dimension is not allowe, because the great brittleness of SmCo easily causes fracture when assembly.ing. Please contact technical support for details.

SEGMENT MAGNET:
General size range: W: 3 - **0mm, H: 1 - *0mm, L: 2 - **0mm
Max Segment: W**0 × H*0 × L**0mm(Large W/L ratio), W**0 × H*0 × L**0mm(Large L/W ratio)
Min Segment: W3 × H1 × L2mm

Note: For large segment, any thin dimension is not allowed, because the great brittleness of SmCo easily causes fracture when assemblying. Please contact technical support for details.

DISC MAGNET:
General size range: D: 1 - **0mm, H: 0.5 - **0mm
Max disc: D**0 × H*0mm(Large D/H ratio), D*0 × H**0mm(Large H/D ratio)
Min disc: D1 × H0.5mm

Note: For large discs, too think thickness is not allowed, because the great brittleness of SmCo easily causes fracture when assemblying . Please contact technical support for details.

RING MAGNET:
General size range: OD: 1.5 - **0mm, ID: 0.5 - **0mm, H: 0.3 - **0mm
Max Ring: OD**0 x ID**0 × H*0mm( Large OD/H ratio), OD*0 x ID*0 x H**0mm(Large H/OD ratio)
Min Ring: OD1.5 x ID0.5 x H0.3mm

Note: For large rings, too thin thickness or wall thicknes is not allowed, because the great brittleness of SmCo easily causes fracture when assemblying. Please contact technical support for details.

IRREGULAR MAGNET:
We have strong and advanced capacity to manufacture all kind of irregular magnets. Welcome! However, irregular magnets mean high cost and complicated process and dont for mass production. Please contact technical support for details.