Description

Our Check Valves are designed to prevent reverse flow. Concentric and eccentric styles as well as our tapered disk design are available for horizontal, vertical applications and are working well without leaking while getting a return pressure. Our special designed Check valve can be using for many applications in such as food, dairy, beverage, pharmaceutical, chemical, and many other industries. The materials are offered for food, dairy, beverage, pharmaceutical, chemical, and many other industries. Our producs have earned the 3A symbol, which requires an annual assessment to make certain each product conforms in all respects to the published standard. It is necessary you specify at the time of order heat numbers and MTR&#**9;s are required. Material Test Reports (MTR&#**9;s) are available to document all heat number. Specifications: *******************************************************************************- Body: SS **6. SS**4 and SS**6L are required based on big volume. Fully precision machined by CNC machine. Angle design make the biggest flowing liquid as well as for disk easy open and close. Connection: clamp end, weld end, male end and female end are available from 1/2", 3/4" up to 4". Connection: weld end are available the tubing according to 3A, SMS, RJT(BS), DIN ****1. Middle clamp designed are available from 1/2", 3/4" up to 3". Middle flange designed are available from 1/2", 3/4" up to 4". Type of ends available: 3A: Clamp, Weld, Bevel male and female are available from 1/2" up 4" SMS: Weld end, male and female end are available from DN*5 up to DN**4. DIN: Weld end, male and female end are available from DN*8, DN*4, DN*2, DN*0, DN*5 and DN**1.6 . I-Line: available from 1" up to 4". Spring: Stainless steel sanitary both closing design, both opening design is required. Seal ring of stem: EPDM. VITON OR SILICON is required. Body O-ring: NBR or EPDM. VITON is required. Working temperature: **0o ~ **0o (EPDM seal)